Veritas 8 door trigger

Veritas 8 door trigger
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 Electronic Security in UK    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Veritas 8 door trigger threlly 12-15-2005
Posted by on December 15, 2005, 8:11 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
My Veritas 8 based system has started setting off the alarm the moment
I open my front door.
Before I leave the house, I do as I have always done, put the code in,
press FULL and go.
I get the usual grace beeps, one type while I am still on the premises,
changing to the normal type when I close the door behind me.
But now, when I come home and open the door expecting the grace period,
the alarm just goes off anyway.
What could be causing this ?
Cheers,
Gary


Posted by Paul Ekins on December 15, 2005, 11:32 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi Gary,

Need more information.
Have you recently re-programmed the alarm code or accidentally entered
programming mode. Is there a detector in the entry hall or looking at the
door from another room.

--
Paul Ekins


paul@lincsecure.co.uk
www.lincsecure.co.uk

> My Veritas 8 based system has started setting off the alarm the moment
> I open my front door.
> Before I leave the house, I do as I have always done, put the code in,
> press FULL and go.
> I get the usual grace beeps, one type while I am still on the premises,
> changing to the normal type when I close the door behind me.
> But now, when I come home and open the door expecting the grace period,
> the alarm just goes off anyway.
> What could be causing this ?
> Cheers,
> Gary
>



Posted by BIG NIGE on December 16, 2005, 4:22 am
If you were  Registered and logged in, you could reply and use other advanced thread options

> Hi Gary,
>
> Need more information.
> Have you recently re-programmed the alarm code or accidentally entered
> programming mode. Is there a detector in the entry hall or looking at the
> door from another room.
>
> --
> Paul Ekins

U got insomnia Paul !!!!!!!! or is it an early Start.



Posted by Paul Ekins on December 16, 2005, 12:47 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Yes it was an early start mate. But hey, I've just got home and I now have
about 14 hours before it all starts again.

--
Paul Ekins


paul@lincsecure.co.uk
www.lincsecure.co.uk

>
>> Hi Gary,
>>
>> Need more information.
>> Have you recently re-programmed the alarm code or accidentally entered
>> programming mode. Is there a detector in the entry hall or looking at the
>> door from another room.
>>
>> --
>> Paul Ekins
>
> U got insomnia Paul !!!!!!!! or is it an early Start.
>
>



Posted by on December 18, 2005, 5:01 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi,
There is a contact on the front door and a PIR mid-hall looking towards
the door, there are no other PIR's that can see the hall.
It would make sense I suppose if the door contact had not functioned
correctly and the PIR in the hall had been the first to 'see' me.
I have not changed any programming on the box etc.
I'll check to see if the door contact is still seated correctly.
Many Thanks.


Similar ThreadsPosted
Veritas manual October 23, 2006, 1:54 pm
VERITAS 8 COMPACT & REDCARE July 6, 2005, 4:26 am
Texecom Veritas 8 install manual October 27, 2005, 9:25 am
Texecom Veritas install manual November 25, 2005, 8:35 pm
Texecom Veritas, Eng / Hold-Off + Gardtec Eurosec CP8L w/LCD RKP February 6, 2007, 4:14 pm

The site map in XML format XML site map

Contact Us | Privacy Policy