|
Posted by Dorothy Bradbury on February 6, 2007, 7:04 pm
If you were Registered and logged in, you could reply and use other advanced thread options > In answer to your questions
> The R8 has a remote keypad (hence R)
> Texecom are very helpfull ring them or go online and they will provide any
> manuals. Default eng is 1234
Brilliant. Many thanks.
> Try the new CPX range (same costing & a lot neater)
> Yes the Odyssey range are supported.
> The Earlier CPX range is a 4ah max whilst the CPX & newer CPL
> take the slimline 2ah. For a 7ah you will need the 800 series.or a
> seperate cpu.
Noted.
> All above can be configured to use fire detection and work with Visonic
> detectors.
Great.
> ?EI? not sure what you mean (its late)
"EI" 12V Smoke Alarm & "EI" 12V Heat Detector - standard units.
They are backup to interlinked mains alarms just as a failsafe.
> As you say if you need a new RKP the extra cost is worth it for the
> advantages of the new panel . I have found both to be reliable and easy
> to program .Whist the CPL series are limited in size (similar to the
> Optima
> compact) they make up for it in flexibility.
> Its one of my favourite small end panels and can be supplied with built in
> dialer/comunicator,Prox, radio and network on the CPX.
Noted - and yes the CPX has a strong feature set.
> If you need any further help let me know or try the relevant web sites.
> TEXE.COM
> RISCOGROUP.CO.UK
Many thanks for all your help, much appreciated :-)
--
DB.
| 
XML site map