|
Posted by BIG NIGE on October 24, 2005, 10:56 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> Help!! I am trying to find a replacement for my alarm panel which has gone
> faulty. The panel is an Omnicron 9000 it protects my work place and also
> links with the smoke detection, if i have a problem the auto dialer phones
a
> given number and informs us the fire alarm or intruder has been triggered.
>
> I'm looking for a replacement either the same or any other recommended
> product.
>
> I've searched the internet but with no luck......
There are many equipment alternatives.(most of which are better than the
Omnicron)
The first Issue is INSURANCE. If you wish your insurers to make any
allowances for or if they make any requirements for your Alarm System you
will need to go to a reputable Installer and have a Maintenance contract as
well. (SSAIB or NACOSS inspectorate registered)
There is no point in installing a system that is not acceptable to your
insurer if they have certain requirements within your policy.
If there is no Insurance requirement for the alarm then you can go ahead and
fit what you like.
Personally I wouldnt go for a combined unit.
A simple cheap alternative would be the Pyronix Sterling 10 LCD (For the
alarm Control System) & the Menvier SD1+ for the Speech Dialler.
These two work together well. If you want something a bit more
sophisticated for the dialler you could look at the Pyronix Vocaliser but
you need to be careful where you site microphones and speakers, & you will
probably need to incorporate a relay so that you can switch off the internal
sounder so that you can listen through the microphone.
| 
XML site map