Locked out of Scantronic 9827 Control Panel

Locked out of Scantronic 9827 Control Panel
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 Electronic Security in UK    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Locked out of Scantronic 9827 Control Panel Evan 04-08-2006
Posted by Evan on April 8, 2006, 7:13 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Folks,

I was attempting to change the time on my 9827 control panel by keying
in the access code + 3 (I think). Instead of displaying YY in the two
digit display as I expected, it's displayed two lines, the typical
display when another command is to be input.

Unfortunately every key I press now just produces a buzzing tone and
nothing seems to put it back into its standby mode (or whatever mode it
is when it's doing nothing).

Any tips?

Evan


Posted by SantaUK on April 8, 2006, 7:01 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


--
Regards


M Millar

> Folks,
>
> I was attempting to change the time on my 9827 control panel by keying
> in the access code + 3 (I think). Instead of displaying YY in the two
> digit display as I expected, it's displayed two lines, the typical
> display when another command is to be input.
>
> Unfortunately every key I press now just produces a buzzing tone and
> nothing seems to put it back into its standby mode (or whatever mode it
> is when it's doing nothing).
>
> Any tips?
>
> Evan
>



Posted by SantaUK on April 8, 2006, 7:03 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Try 99 then Clear (tick)
Or 7 then Clear (tick)

If you want I can get you the manuals.

--
Regards


M Millar

> Folks,
>
> I was attempting to change the time on my 9827 control panel by keying
> in the access code + 3 (I think). Instead of displaying YY in the two
> digit display as I expected, it's displayed two lines, the typical
> display when another command is to be input.
>
> Unfortunately every key I press now just produces a buzzing tone and
> nothing seems to put it back into its standby mode (or whatever mode it
> is when it's doing nothing).
>
> Any tips?
>
> Evan
>



Posted by Evan on April 13, 2006, 7:27 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Thanks... I will try this.

We've actually got the user and installation manuals. Neither have a
troubleshooting section or describe this problem.

They do mention that the flashing double lines are an indication that
the system is waiting for an input. In this case however, pressing any
button just causes an "error" buzz.

SantaUK wrote:
> Try 99 then Clear (tick)
> Or 7 then Clear (tick)
>
> If you want I can get you the manuals.
>
> --
> Regards
>
> M Millar


Posted by SantaUK on April 13, 2006, 4:11 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
If your confident about programming it again, I would do a cold restart and
start again.

--
Regards


M Millar

> Thanks... I will try this.
>
> We've actually got the user and installation manuals. Neither have a
> troubleshooting section or describe this problem.
>
> They do mention that the flashing double lines are an indication that
> the system is waiting for an input. In this case however, pressing any
> button just causes an "error" buzz.
>
> SantaUK wrote:
>> Try 99 then Clear (tick)
>> Or 7 then Clear (tick)
>>
>> If you want I can get you the manuals.
>>
>> --
>> Regards
>>
>> M Millar
>



Similar ThreadsPosted
Scantronic 9751 Alarm panel May 30, 2006, 4:02 pm
problem with TS690 alarm control panel appearing blank November 15, 2006, 5:13 am
Control unit for a proximity reader? September 2, 2005, 5:58 am
Entry/exit control proximity system? November 17, 2006, 4:34 pm
Anybody played with an ATS Panel? May 16, 2006, 4:29 pm
Electronics Line USA releases Infinite: A Wireless Security Alarm Panel for the Future September 4, 2007, 4:28 pm

The site map in XML format XML site map

Contact Us | Privacy Policy