Installing CCTV

Installing CCTV

Secure Home | Search | About
 Electronic Security in UK    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Installing CCTV London 08-26-2006
Posted by on August 26, 2006, 6:53 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi folks,
I have an aerial in the loft which feeds three rooms via an un-powered
connection/splitter near the aerial.
I currently use a booster for each room fitted near the TV.
Can I fit some sort of junction box - possibly powered - in place of
this splitter to feed the signal from 2 or 3 CCTV cam's (in addition
to the digital TV signal)to the three rooms.
The reason is it will save a lot of work/mess running the cable(s)
through the house.


Posted by Micky Savage on August 27, 2006, 8:44 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi,
I have been tring to send you the in fo you need, but I keep having the mail
returned.

Regards,


Micky Savage,

Modern Security Systems.
Leeds. W.Yorkshire.



Posted by on August 27, 2006, 1:12 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Could you post the basics on this group please?

Posted by Micky Savage on August 27, 2006, 4:12 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi .

File to big. I am going to work now will do it for you tomorrow. I will have
to type it .

Micky.


It can be done, but might be a bit pricey.


Any Way


Later.



Posted by on August 27, 2006, 5:09 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
>It can be done, but might be a bit pricey.

Than you for the replies.
I envisaged a junction box with a feed in of the aerial and say 3
cams.
With out lets for the existing three TV cables feeding a room each.
As you know a join in this main cable invariably causes a reduction of
signal.
I was hoping there was such a box available for under £150 - if not -
all things considered I will lay new feeds.

> I will have
>to type it .
Please do not go to any trouble as if it is a big job (see above) i
will ignore the existing cables.

Similar ThreadsPosted
FA: CCTV Equipment November 27, 2005, 4:36 pm
CCTV Cameras January 9, 2006, 8:38 am
CCTV recording January 21, 2006, 5:44 am
CCTV Hookup to PC? January 22, 2006, 9:50 am
NVT CCTV Transmission February 17, 2006, 2:43 pm
CCTV Camera March 21, 2006, 1:13 pm
CCTV cameras October 17, 2008, 8:07 am
Wireless CCTV web cam supplier December 15, 2005, 4:09 am
CCTV camera jitter January 21, 2006, 5:39 am
Home CCTV starter kit September 21, 2007, 9:46 am

The site map in XML format XML site map

Contact Us | Privacy Policy