|
Posted by fred on June 21, 2005, 1:51 pm
If you were Registered and logged in, you could reply and use other advanced thread options
ZA free version 5.5.094.000 (latest/current) on XP Home and W98SE
Under Firewall Zones there is an entry for the Adapter Subnet that is
apparently present by default 192.168.1.102. Also apparently by default it
is set to the internet zone. If I understand correctly I was supposed to
enter a range of IPs for my local workgroup 192.168.1.100-192.168.1.150 and
set it to trusted; I did that. These IPs are assinged by DHCP from my
Belkin wireless router which I set to assign starting at 192.168.1.100.
Also I set the Belkin to have the IP/gateway address 192.168.1.77.
Why is 192.168.1.102 for the local Adapter set to internet; it's a 3c905?
It is possible to change it to trusted. Which is right?
Currently 192.168.1.102 is both set to internet zone by the Adapter Subnet
line and by the range line for the local workgroup which is set to trusted.
What is the zone for 192.168.1.102 internet or trusted? Does the order a
line appears in the zone list make any difference?
So do I need to add a ZA zone entry 192.168.1.77 and set it to the internet
zone?
| 
XML site map