Newbie: (unwanted) incoming traffice on static DSL line

Newbie: (unwanted) incoming traffice on static DSL line

Secure Home | Search | About
 General Computer Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Newbie: (unwanted) incoming traffice on static DSL line regs@excedere.com 11-20-2005
Posted by regs@excedere.com on November 20, 2005, 8:17 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Group:

I am a newbie when it comes to this - I have a static IP DSL line,
running Trend Micro's firewall and a wireless Linksys router (for
roaming about my office/house with laptops.) On the router setup page
there is a list of incoming traffic (a mile long) that lists IP
addresses from around the world. The question is: how do I stop this?
>From what I know, this appears to be access to the router and not my
computer (I am assuming the firewall is protecting my computer--but you
know what happens when you ass/u/me!)

Anyway if someone could point me to some help on the following:
a) how do I block the incoming traffic? (with the caveat that I
sometimes want to connect to my office computer using tools like
GoToMyPC...)
b) how can I limit access (to my wireless network using the wireless
connection) to just the computers on my home/office PC?

Thanks for the help--I'm feeling very intruded upon...

Jeff


Posted by Leythos on November 20, 2005, 8:31 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
regs@excedere.com says...
> Group:
>
> I am a newbie when it comes to this - I have a static IP DSL line,
> running Trend Micro's firewall and a wireless Linksys router (for
> roaming about my office/house with laptops.) On the router setup page
> there is a list of incoming traffic (a mile long) that lists IP
> addresses from around the world. The question is: how do I stop this?
> >From what I know, this appears to be access to the router and not my
> computer (I am assuming the firewall is protecting my computer--but you
> know what happens when you ass/u/me!)
>
> Anyway if someone could point me to some help on the following:
> a) how do I block the incoming traffic? (with the caveat that I
> sometimes want to connect to my office computer using tools like
> GoToMyPC...)
> b) how can I limit access (to my wireless network using the wireless
> connection) to just the computers on my home/office PC?
>
> Thanks for the help--I'm feeling very intruded upon...

Most NAT routers block inbound connections that your network has not
requested. So, if I were to try and connect to your computer from here,
the NAT router would stop me from getting past it since your computer
did not request my connection.

NAT Routers make great simple appliances to keep the unsolicited
internet users out of your network (even with a single PC you have a
network). These devices should not be confused with real firewalls, they
don't offer anywhere near the protection if any at all.

As for NAT Routers and outbound, well, lets just say the barn-door is
always open. With the exception of a few NAT routers, they all allow
anything out of your network. This means that if you were to have your
machine compromised, the malware on it could phone home and get
instructions or more malware and self install it on your computer.

As for blocking the connections, you can't, as long as you have a public
connection there will be attempts to connect - most of it is just
background chatter and can be ignored for the most part.

In most cases, unless you really understand security, your personal
firewall running on your computer won't do much to protect you, as you
control it, any mistake you make will possibly compromise your computer.

I hope you've secured your Wireless access - if not, most are in a
default setup, which means that anyone near enough can access your
network. Make sure that you read this:

http://www.microsoft.com/windowsxp/using/networking/learnmore/bowman_
05february10.mspx


--

spam999free@rrohio.com
remove 999 in order to email me

Similar ThreadsPosted
350 invisible incoming emails June 10, 2004, 9:09 am
OpenSSL CSR command line help required March 6, 2007, 7:05 am
FYI: Ross Anderson's security book available on-line September 1, 2006, 5:58 am
Is Putty a full replacement of the command line (openssh) client ? July 19, 2005, 5:12 pm
Searching aescipher.exe or similar command line tool with AES encryption February 15, 2007, 6:39 am
Static IP Vs DHCP February 27, 2005, 10:42 pm
Yasca v1.0 Released - New Static Analysis Tool October 6, 2008, 11:00 am
Unwanted Malware October 8, 2005, 5:27 pm
Tunneling newbie? February 21, 2005, 8:52 pm
Newbie... need basics August 10, 2006, 8:01 pm

The site map in XML format XML site map

Contact Us | Privacy Policy