pix and multiple syslog-ng servers

pix and multiple syslog-ng servers
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 Networking Firewalls    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
pix and multiple syslog-ng servers elinor 10-25-2006
Posted by elinor on October 25, 2006, 2:09 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
we are about to hire an outside vendor to help us with intrusion
prevention. they have requested our pix logs, which i have sent to a
syslog-ng server. syslog-ng can forward logs on, but i believe it
requires another syslog-ng client to accept the logs, which the vendor
doesn't have. my question is whether the pix can send its logs to two
syslog servers or whether issuing the command would replace the
location where the logs currently are sent. my pix is in production,
so i am not at liberty to just try things. thanks in advance to anyone
who knows the answer.


Posted by Walter Roberson on October 25, 2006, 4:43 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
>we are about to hire an outside vendor to help us with intrusion
>prevention.

Please don't multi-post; if you have the same content for multiple
newsgroups, then list them all on the Newsgroups: line, comma
seperated (but no spaces in the list.)

I have answered your question in comp.dcom.sys.cisco

Posted by elinor on October 26, 2006, 8:45 am
If you were  Registered and logged in, you could reply and use other advanced thread options
thanks. sorry. i'm using google groups and don't really know what i
am doing. thanks for the tip.

Walter Roberson wrote:
> >we are about to hire an outside vendor to help us with intrusion
> >prevention.
>
> Please don't multi-post; if you have the same content for multiple
> newsgroups, then list them all on the Newsgroups: line, comma
> seperated (but no spaces in the list.)
>
> I have answered your question in comp.dcom.sys.cisco


Similar ThreadsPosted
Multiple TCP/HTTP servers with only one IP : how to ? April 23, 2005, 4:40 am
PIX firewalling web servers July 23, 2004, 4:06 pm
Re: PIX firewalling web servers July 26, 2004, 10:35 am
5XP Virtual Servers AND SSH August 3, 2005, 6:29 pm
netcreen 25 dmz web servers October 30, 2005, 10:50 am
106023: Deny tcp src outside from WWW Servers September 7, 2005, 5:04 am
Zonealarm blocking all UDP servers November 7, 2007, 8:37 pm
ZoneAlarm: All Internet Servers Set Disallow July 23, 2005, 7:03 pm
Any public port forwarding servers available ? April 18, 2006, 9:10 am
Watchguard Firebox III, OWA and 2 Exchange Servers January 17, 2007, 3:31 pm

The site map in XML format XML site map

Contact Us | Privacy Policy