configuring IP range for zones

Secure Home | Search | About

Lost Password?

Networking Firewalls

get this group's latest topics as an RSS feed

add this group's latest topics to your My MSN content

add this group's latest topics to your My Yahoo content

add this group's latest topics to your Google content

Subject	Author	Date
configuring IP range for zones	John Smith	09-19-2007

Posted by John Smith on September 19, 2007, 3:26 pm

If you were Registered and logged in, you could reply and use other advanced thread options

Hello,

We have just purchased a SSG-5 firewall and I am configuring it for our
network. Network has LAN and DMZ.

We are given 8 IP addresses by our ISP (5 usable). Something like this:

xxx.yyy.zzz.192 Network
xxx.yyy.zzz.193
xxx.yyy.zzz.194
xxx.yyy.zzz.195
xxx.yyy.zzz.196
xxx.yyy.zzz.197
xxx.yyy.zzz.198 GW
xxx.yyy.zzz.199 Broadcast

Exchange server will be in the LAN and will have a private IP, smart host
will be i n the DMZ and will have public IPs. How would I configure the
firewall to use the public IPs? IP with the last octate of 198 is the
router's IP which is owned by T1 provider.

Thanks you,
John

Similar Threads	Posted
Using Port Based VLANs to isolate security zones	February 29, 2008, 3:55 pm
Avaya / Lucent firewalls : parsing of multiple ruleset zones	December 22, 2004, 6:15 am
IP Spoofing In My IP Range!!!	January 20, 2005, 3:53 am
adding new ip range to fw-1	March 24, 2005, 4:18 pm
new ip address range	April 3, 2005, 8:22 pm
IP address range	October 20, 2005, 5:58 pm
Extending range of wireless network	November 28, 2004, 8:34 pm
SuSeFirewall2 and range of addresses without using mask	December 17, 2004, 10:17 am
ZAP reports incoming from 169.254.*.*. Reserved range, what gives?	December 18, 2005, 10:23 pm
Thompson speedtouch 510 forwarding a range of ports??	February 4, 2005, 4:02 am

The site map in XML format XML site map