PIX and VLANs

PIX and VLANs
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 Networking Firewalls    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
PIX and VLANs vlpresher 03-05-2007
|--> Re: PIX and VLANs www.BradReese.C...03-05-2007
|--> Re: PIX and VLANs Walter Roberson03-10-2007
`--> Re: PIX and VLANs Walter Roberson03-11-2007
Posted by on March 5, 2007, 5:57 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
I am researching the requirements to configure a pix 515E connected to
a Cisco 2950 switch. I am researching the requirements to enable VLANS
between these two devices. What do I need to look for a and what kind
of problems could be encountered?

Thanks
ICEMAN


Posted by www.BradReese.Com on March 5, 2007, 11:46 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
You may wish to investigate Cisco 2950 Technical Docs:

http://www.cisco.com/en/US/products/hw/switches/ps628/tsd_products_support_series_home.html

as well as PIX

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/tsd_products_support_series_home.html

and PIX Software

http://www.cisco.com/en/US/products/sw/secursw/ps2120/tsd_products_support_series_home.html

Sincerely,

Brad Reese on Cisco
Network World Magazine Cisco Subnet
http://www.networkworld.com/subnets/cisco/



Posted by ether1 on March 6, 2007, 5:13 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
On Mar 5, 2:57 pm, vlpres...@yahoo.com wrote:
> I am researching the requirements to configure a pix 515E connected to
> a Cisco 2950 switch. I am researching the requirements to enable VLANS
> between these two devices. What do I need to look for a and what kind
> of problems could be encountered?
>
> Thanks
> ICEMAN

Could you possibly give some more details? It should not be a problem
configuring these 2 devices to work together.


Posted by Walter Roberson on March 10, 2007, 7:14 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
>I am researching the requirements to configure a pix 515E connected to
>a Cisco 2950 switch. I am researching the requirements to enable VLANS
>between these two devices. What do I need to look for a and what kind
>of problems could be encountered?

The PIX 515E will require PIX 6.3(1) or later software release.
The 2950 should be usable with any IOS that has been supported for it.

Was there something more specific you were looking for?
e.g., do you need to know things such as that you won't be able
to terminate a VPN connection on the VLAN interface on the PIX?

Posted by Hexalon on March 11, 2007, 2:21 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
On Mar 5, 5:57 pm, vlpres...@yahoo.com wrote:
> I am researching the requirements to configure a pix 515E connected to
> a Cisco 2950 switch. I am researching the requirements to enable VLANS
> between these two devices. What do I need to look for a and what kind
> of problems could be encountered?
>
> Thanks
> ICEMAN

When VLANs are used on a switch you have to setup a router. VLANs will
create two different networks that can't talk to each other with out a
router. You will get "Network destination unreachable" error with
ping, if you don't setup a router.


Similar ThreadsPosted
VLANs/VPN on PIX 506e September 2, 2006, 5:58 am
VLANS in a DMZ - good idea? January 26, 2005, 5:40 am
VLANs over Geographical Boundaries April 27, 2006, 8:05 pm
Using Port Based VLANs to isolate security zones February 29, 2008, 3:55 pm

The site map in XML format XML site map

Contact Us | Privacy Policy