Netscreen Remote and Symantec Firewall Client

Netscreen Remote and Symantec Firewall Client
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 Networking Firewalls    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Netscreen Remote and Symantec Firewall Client Bucky Kim 11-08-2004
Posted by Bucky Kim on November 8, 2004, 6:31 am
If you were  Registered and logged in, you could reply and use other advanced thread options
I'm currently running Netscreen's Secure VPN Client SafeNet SoftRemote
10.0.0 build 10 and Symantec's client firewall version 7.1.
Configured within the symantec firewall, I've enabled every
application that Netscreen uses as well as enable the authentication
ip address. But when the client firewall is enabled the connect is
empty while when it's disabled, the connect shows my VPN connection.
I'm wondering if there's a way to configure the symantec firewall to
allow the Netscreen's VPN tunnel. Any help will be appreciated.


Posted by Gary on November 8, 2004, 8:10 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Bucky Kim wrote:

> I'm wondering if there's a way to configure the symantec firewall to
> allow the Netscreen's VPN tunnel. Any help will be appreciated.

Try opening UDP port 500 for Internet Key Exchange (IKE) traffic. You
might also need to permit IP Type 50 Encapsulating Security Payload
(ESP) packets and IP Type 51 Authentication Header (AH) packets.

-Gary


Similar ThreadsPosted
Symantec VPN client for a MAC (v8 or v9)/ Symantec VPN CLient for Vista x64 yet/connection issues.. April 30, 2007, 9:45 am
VPN through Symantec Client Firewall July 27, 2005, 10:02 am
Symantec/Norton Firewall and Remote Administration November 13, 2006, 6:26 pm
Symantec Client Firewall Fails to Start June 20, 2005, 1:34 am
Print shareing with Symantec Client firewall September 2, 2005, 1:22 am
Symantec Client Firewall - setting up secure Emule January 6, 2006, 4:22 pm
Symantec Client Security 3.0 - Firewall Policy Update Failed April 28, 2006, 10:43 am
VPN problems from Linksys WAG54G to Netscreen 208 using netscreen client November 28, 2005, 5:36 pm
Cisco and Symantec VPN Client November 30, 2005, 6:32 am
Symantec Client Security on windows 98 May 25, 2005, 2:51 am

The site map in XML format XML site map

Contact Us | Privacy Policy