|
Posted by on March 19, 2008, 5:15 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I have a Netopia R910 that was previously setup to use a dhcp based
cable account. We had an internal requirement for a static IP address
and were provided with a block of IP's (5 to be exact).
The problem is that the requirement was for a second web server to be
setup behind the firewall. We already have 443/tcp and 80/tcp mapped
to our exchange server for remote email access but also require 443/
tcp and 80/tcp to be mapped to our second web server for another
application. I'd like to use one of the addresses from the block to
setup the second web server but am unsure as to how to do this in the
Netopia R910's menu.
I had it to the point where I could ping a second public ip address
from the internet, but couldn't get past that.
| 
XML site map