|
Posted by Leythos on October 17, 2005, 11:51 am
If you were Registered and logged in, you could reply and use other advanced thread options
99x@gmx.net says...
> Hello,
>
> I configured a connection between Netgear ProSafe VPN Client and
> Netgear ProSafe VPN Firewall FVS114. The connection is established
> successfully. All logs, client side and firewall side indicate a
> succesfully connection.
>
> The problem is that I am still not able to reach any hosts of the
> remote subnet that I configured. Anybody had a similar probelem before
> and not been able to reach host on the other side of the tunnel,
> altough it is established successfully?
>
> Some details on the firewall:
> Local Subnet:
> 192.168.111.0
> 255.255.255.0
>
> Remote:
> Any
>
> On the Client:
> Connect through DynDNS Hostname
If you have 192.168.111.0/24 on both sides you won't be able to
communicate properly with each sides nodes.
Did you setup the remote node local subnet?
--
spam999free@rrohio.com
remove 999 in order to email me
| 
XML site map