|
Posted by John Antypas on April 1, 2008, 9:54 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Here's a new question I've never been able to answer.
I'm trying to build a multi-WAN Linux router. Normally, I have four WAN
ports:
WAN1: Cable modem (fast link)
WAN2: DSL line (slow link)
WAN3: Public WiFi
WAN4: DMZ Servers
LAN1: Connection to Internal network
The box has a built-in GigE connection for the LAN side, and since all
four of the WAN connections are less than 100Mb (typically less than
10), my first thought would be to find a 4-port PCI Ethernet card. These
are, however, very hard to find.
I could also uise a few NAT routers, but this could be quite complicated.
Finally, I could do something like this:
1. Get a VLAN-aware switch
2. WAN gets VLAN tagged with four tags (WAN1, WAN2, WAN3, and WAN4)
3. LAN stays as in example 1
4. I plug all of the WAN links into the switch and do port tagging for
each one.
Which one would people do?
| 
XML site map