How to route traffic from one LAN subnet to another LAN subnet?

Secure Home | Search | About

Lost Password?

Networking Firewalls

get this group's latest topics as an RSS feed

add this group's latest topics to your My MSN content

add this group's latest topics to your My Yahoo content

add this group's latest topics to your Google content

Subject	Author	Date
How to route traffic from one LAN subnet to another LAN subnet?	stevehunter_1	12-26-2007

Posted by on December 26, 2007, 5:37 pm

If you were Registered and logged in, you could reply and use other advanced thread options

I have two switches, one is 10.10.0.0/24 and the other is
192.168.0.0/24

i want them to talk to each other. I would like to use my netscreen
firewall device, but i will use whatever is easy and cheap.

How do i get 192.168.0.100 to route traffic to 10.10.0.100? the
gateway for 192.168.0.100 is the firewall (192.168.0.1). what do i do
with the firewall? what is the terminology i am looking for to route
traffic back and forth between the two LANs

thanks

Similar Threads	Posted
Schools subnet = 10.0.0.1 Classes subnet 10.0.0.1 can't connect to internet	May 23, 2005, 4:02 pm
VPN Security Risk - Subnet Key Exchange	April 19, 2005, 12:51 pm
Local subnet has "illegal host"	August 15, 2005, 4:05 am
An internal subnet address as a gateway?	November 23, 2006, 7:06 pm
Online Network(Subnet) Calculators	July 17, 2007, 8:11 am
"You Cannot Delete an Active Network/Adapter Subnet"	April 22, 2005, 2:57 pm
Cisco Pix 506 tftp config file to different subnet	May 26, 2006, 5:11 pm
Kerio: Allowing specific subnet through VPN adaptor	October 2, 2006, 8:07 am
Netscreen 50 - Dialup VPNs - more than one destination subnet	October 2, 2006, 1:55 pm
Netscreen 50 Different NAT'ed Public IP for Internal Subnet	December 22, 2006, 9:17 am

The site map in XML format XML site map