FW-1 CLI?

FW-1 CLI?
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 Networking Firewalls    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
FW-1 CLI? brent.chambers@gmail.com 08-14-2007
|--> Re: FW-1 CLI? Konstantinos Ag...08-15-2007
Posted by brent.chambers@gmail.com on August 14, 2007, 1:51 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Does FW-1 have a command line interface and if so, how do I get to
it. I'm somewhat new to Checkpoint FW-1, and having got it just
implemented into the office infrastructure perimeter, I'd like to get
to know it better than those half-wit admins here. :) Thanks in
advance.

B.Chambers


Posted by Konstantinos Agouros on August 15, 2007, 6:05 am
If you were  Registered and logged in, you could reply and use other advanced thread options

>Does FW-1 have a command line interface and if so, how do I get to
>it. I'm somewhat new to Checkpoint FW-1, and having got it just
>implemented into the office infrastructure perimeter, I'd like to get
>to know it better than those half-wit admins here. :) Thanks in
>advance.
If You mean a commandline interface to define rules like You have with
PIX or NetScreen. No it does not.

The fwm command with its subcommands gives You some options from the
commandline though.

Regards,

Konstantin

>B.Chambers

--
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elwood@agouros.de
Otkerstr. 28, 81547 Muenchen, Germany. Tel +49 89 69370185
----------------------------------------------------------------------------
"Captain, this ship will not survive the forming of the cosmos." B'Elana Torres

Posted by mak on August 17, 2007, 6:03 am
If you were  Registered and logged in, you could reply and use other advanced thread options
brent.chambers@gmail.com wrote:
> Does FW-1 have a command line interface and if so, how do I get to
> it. I'm somewhat new to Checkpoint FW-1, and having got it just
> implemented into the office infrastructure perimeter, I'd like to get
> to know it better than those half-wit admins here. :) Thanks in
> advance.
>
> B.Chambers
>
of course, you can ssh to it.
depending on the OS (Nokia, SecureGuard, Secure Platform ...) you have certain
(more or less unix-like) commands.
but you can't edit any firewall rules.(actually i think you could - but it is
not recommended)
furthermore you have access via https whereyou define your ssh clients...

this is a good place to start reading:

http://www.cpug.org/forums/

M


The site map in XML format XML site map

Contact Us | Privacy Policy