Checkpoint Safe@office VPN transparent ?

Checkpoint Safe@office VPN transparent ?
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 Networking Firewalls    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Checkpoint Safe@office VPN transparent ? Michel HERRSCHER 10-13-2006
Posted by Michel HERRSCHER on October 13, 2006, 5:14 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hello to all,

We have a safe@office 110 on our site to implement FW for the LAN
We have to implement a nortel VPN gateway for a specific application on the
same LAN

I do not find on the checkpoint box :
1) how to specify the DHCP address range
2) how to tell that it must be VPN transparent for the Nortel ( which have
specific LAN addresses and a specific IP destination subnet)

Thanks for your help
Michel HERRSCHER



Posted by TechGrrl on October 14, 2006, 8:40 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi Michel,

I recommend you ask this questions on the SofaWare message board here:
http://www.sofaware.com . It's more likely you'll get a quick and
precise reply. Be sure to mention what firmware version your box is
running as additional features were added in each major release.

Cheers!
- TechGrrl

Michel HERRSCHER wrote:
> Hello to all,
>
> We have a safe@office 110 on our site to implement FW for the LAN
> We have to implement a nortel VPN gateway for a specific application on the
> same LAN
>
> I do not find on the checkpoint box :
> 1) how to specify the DHCP address range
> 2) how to tell that it must be VPN transparent for the Nortel ( which have
> specific LAN addresses and a specific IP destination subnet)
>
> Thanks for your help
> Michel HERRSCHER


Similar ThreadsPosted
Transparent (bridge) firewall November 15, 2004, 7:11 pm
Netscreen in Transparent Mode. June 1, 2005, 9:15 am
IPCop and transparent proxy September 13, 2005, 6:31 pm
Netscreen 25 - transparent firewall May 15, 2006, 4:28 pm
Fortigate DMZ in transparent mode November 20, 2007, 11:46 am
Check Point Transparent Mode October 2, 2006, 12:11 pm
Netscreen Transparent Firewall broadcast traffic? February 27, 2005, 5:49 pm
"Transparent" Mode in IPCop / smoothwall / MNF (real IP inside firewall) July 21, 2005, 11:43 pm
Transparent mode in NS 5GT (Port mode Extended) April 27, 2006, 3:41 am
Checkpoint - Deny traceroute through checkpoint firewall August 10, 2004, 3:27 pm

The site map in XML format XML site map

Contact Us | Privacy Policy