|
Posted by Taishi on September 25, 2005, 5:49 am
If you were Registered and logged in, you could reply and use other advanced thread options
Help!
I'm having major problems with my Belkin Wireless Network Access
Point(F5D6130):
Lost wireless connection and tried the following:
Powered off/on AP
Reset and Powered Off/ON AP
Unable to ping the default ip in both cases. ip = 192.168.0.254
Attempted using the PING command and it fails. "Request Timed Out"
I have another PC connected to the network that I'm using to ping the AP.
Any ideas?
Thanks...
Additional info:
> Your info is not enough.
> like how far the unit is from the wireless access point?? 24 inches
> Is your card installed properly. Was it working earlier? Yes.. but I'm
trying to connect to it directly with a cable. No luck.
> Did you ping your own pc??? Yes. And I was able to ping Yahoo.com and
other computers on the network.
> lemme know about this. If you dont understand what i am refering to then
you
> are most welcome to ask more questions. Please leave me a note also on my
> email.
> Sometimes, it is easy to answer if i run out of time and am unable to
browse
> this newsgroup.
| 
XML site map