eol dsc1550

eol dsc1550
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
eol dsc1550 klcross 04-01-2008
Posted by alarman on April 3, 2008, 1:12 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Crash Gordon wrote:
> Hmmmm....why bother having a keypad if he's not using any of the
> zones on the DSC for detection but merely for powering the pirs?
> What panel in existence doesn't have power to run a few pirs, that he
> has to use a different panel as a power supplyWhat's powering the
> cellular?
>
> ...whole thing sounds goofy.

Ya think?

--
js

He who laughs last.......thinks the slowest



Posted by Crash Gordon on April 3, 2008, 9:45 am
If you were  Registered and logged in, you could reply and use other advanced thread options
ot: you guys are not up in vegas I guess?



--
**Crash Gordon**







| Crash Gordon wrote:
| > Hmmmm....why bother having a keypad if he's not using any of the
| > zones on the DSC for detection but merely for powering the pirs?
| > What panel in existence doesn't have power to run a few pirs, that he
| > has to use a different panel as a power supplyWhat's powering the
| > cellular?
| >
| > ...whole thing sounds goofy.
|
| Ya think?
|
| --
| js
|
| He who laughs last.......thinks the slowest
|
|



Posted by alarman on April 3, 2008, 11:47 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Crash Gordon wrote:
> ot: you guys are not up in vegas I guess?
>
>
>
>
>> Crash Gordon wrote:
>>> Hmmmm....why bother having a keypad if he's not using any of the
>>> zones on the DSC for detection but merely for powering the pirs?
>>> What panel in existence doesn't have power to run a few pirs, that
>>> he has to use a different panel as a power supplyWhat's powering the
>>> cellular?
>>>
>>> ...whole thing sounds goofy.
>>
>> Ya think?
>>
>> --
>> js
>>
>> He who laughs last.......thinks the slowest

Nah. SOS last year, and Doug's Karaoke voice is a bit strained from yelling
at an electrician in National City last month. Maybe next year. You?

--
js

He who laughs last.......thinks the slowest



Posted by Crash Gordon on April 3, 2008, 5:46 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
nah, not this year. I was invited to the Microsoft Summit up in Seattle on
the 14-18 so I'm going there instead, ISC will have to wait till next year
for me....besides not much happens there.

--
**Crash Gordon**







| Crash Gordon wrote:
| > ot: you guys are not up in vegas I guess?
| >
| >
| >
| >
| >> Crash Gordon wrote:
| >>> Hmmmm....why bother having a keypad if he's not using any of the
| >>> zones on the DSC for detection but merely for powering the pirs?
| >>> What panel in existence doesn't have power to run a few pirs, that
| >>> he has to use a different panel as a power supplyWhat's powering the
| >>> cellular?
| >>>
| >>> ...whole thing sounds goofy.
| >>
| >> Ya think?
| >>
| >> --
| >> js
| >>
| >> He who laughs last.......thinks the slowest
|
| Nah. SOS last year, and Doug's Karaoke voice is a bit strained from
yelling
| at an electrician in National City last month. Maybe next year. You?
|
| --
| js
|
| He who laughs last.......thinks the slowest
|
|



Posted by joe on April 3, 2008, 12:48 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Crash Gordon wrote:
> ot: you guys are not up in vegas I guess?
>
>
>
I'm not up in Vegas but who is?

I made all zones, 1, 3 which is slow &
silent and Interior Home-Away Loop.
With no fire zone. Then I made all zones
normally closed without a end of line
resistor. This works fine, all zones are
off, and the ready light is on the
keypad.

The trouble light is coming on now after
a few minutes, which points to the battery.

I am going to give it a few hours then
go back and check to see if the battery
trouble light remains on.

I had to come back to this newsgroup and
read about what the board should be
putting out for the battery. The Battery
is new. If when I go back and the
trouble light is still on. The float
charges is around what 13.4 to 13.8. I
will just put a meter to the plus and
minus sides of the battery wires, to
check this. Would this be correct? I
want to see if the board is charging the
battery.

Thanks, Joe

PS I've only been to Vegas once, that
was when I was younger, and now I have
more bills to pay.


The site map in XML format XML site map

Contact Us | Privacy Policy