WANTED - Veritas PCB

WANTED - Veritas PCB
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
WANTED - Veritas PCB vw-stuff 11-18-2005
Posted by vw-stuff on November 18, 2005, 10:55 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Anyone know where I can buy an older PCB from a Veritas R8 alarm.
Number on PCB is "TEXECOM 1995 PC009-4"

TIA



Posted by BIG NIGE on November 19, 2005, 3:40 am
If you were  Registered and logged in, you could reply and use other advanced thread options

> Anyone know where I can buy an older PCB from a Veritas R8 alarm.
> Number on PCB is "TEXECOM 1995 PC009-4"
>
> TIA
>
I assume that from your lack of reply to me in your other thread on this
subject that

(1) The quote of £130 was supply of the part only ?
(2) You are capable of fitting and programming an alarm control panel
yourself (dont forget that if you change the PCB you will also have to
program the system from scratch)

You would be better off getting a newer (more modern) alarm panel the
majority of which are superior to the Veritas 8.

Chenging the Panel does not mean changing the Sensors as well.



Posted by BIG NIGE on November 19, 2005, 11:43 am
If you were  Registered and logged in, you could reply and use other advanced thread options

> Anyone know where I can buy an older PCB from a Veritas R8 alarm.
> Number on PCB is "TEXECOM 1995 PC009-4"
>
> TIA
>
Presumably someone has tested your system to come to the conclusion that
there is a dry joint on the PCB because most tamper faults on alarm systems
are NOT dry joint faults on the PCB.



Posted by Paul Ekins on November 19, 2005, 3:30 pm
If you were  Registered and logged in, you could reply and use other advanced thread options


I am sure this person would have the ability to change the board and program
the thing.
Typical example of a little knowledge causing a big F@#!UP...
Why do people think we all do this for the fun, yet they expect a wage for
going to work.



Similar ThreadsPosted
Veritas R8 - tamper November 17, 2005, 3:46 pm
Veritas R8 Problem May 5, 2006, 5:59 pm
Veritas 8C manuals October 20, 2006, 11:57 am
Veritas R8 old manual October 23, 2006, 1:54 pm
Veritas R8 PIR problem February 20, 2008, 6:39 am
HELP VERITAS R8 with CQR SIGMA BELL July 6, 2005, 4:55 pm
Re: HELP VERITAS R8 with CQR SIGMA BELL July 6, 2005, 11:14 pm
Veritas 8C - needs a complete reset. November 24, 2005, 2:59 pm
Texecom Veritas 8 install manual October 27, 2005, 9:26 am
Old Parts Wanted January 6, 2006, 10:48 pm

The site map in XML format XML site map

Contact Us | Privacy Policy