Vista 20 and IR motion problem

Vista 20 and IR motion problem
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Vista 20 and IR motion problem rickm 04-29-2008
Posted by on April 29, 2008, 11:18 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
The Vista 20P door sensors work great but the IR motion does not. If
its set to N/C then the system does
not come ready however its set to N/O then it does which of course is
wrong. The programmng summary
looks like this:

ZN ZT P RC HW : RT
05 04 1 10 NC 1

The motion detect was working on the old Ademco 4030 panel and the LED
lights with movement. Ive read
through the manual cover to cover as well as the programming guide
many times and motion detectors are
not even mentioned.

Any suggestions would be greatly appreciated

Posted by Crash Gordon on April 29, 2008, 11:37 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
what make and model is the pir?



--
**Crash Gordon**







> The Vista 20P door sensors work great but the IR motion does not. If
> its set to N/C then the system does
> not come ready however its set to N/O then it does which of course is
> wrong. The programmng summary
> looks like this:
>
> ZN ZT P RC HW : RT
> 05 04 1 10 NC 1
>
> The motion detect was working on the old Ademco 4030 panel and the LED
> lights with movement. Ive read
> through the manual cover to cover as well as the programming guide
> many times and motion detectors are
> not even mentioned.
>
> Any suggestions would be greatly appreciated



Posted by on April 30, 2008, 12:01 am
If you were  Registered and logged in, you could reply and use other advanced thread options
wrote:
> what make and model is the pir?
>
> --
> **Crash Gordon**
>
>
>
>
>
> > The Vista 20P door sensors work great but the IR motion does not. =A0If
> > its set to N/C then the system does
> > not come ready however its set to N/O then it does which of course is
> > wrong. =A0The programmng summary
> > looks like this:
>
> > ZN =A0ZT =A0P =A0RC =A0HW : RT
> > 05 =A004 =A01 =A0 10 =A0 NC =A0 =A0 1
>
> > The motion detect was working on the old Ademco 4030 panel and the LED
> > lights with movement. =A0Ive read
> > through the manual cover to cover as well as the programming guide
> > many times and motion detectors are
> > not even mentioned.
>
> > Any suggestions would be greatly appreciated- Hide quoted text -
>
> - Show quoted text -

Its a FOX , not sure of the model. This is the original unit. I do
also have a Honeywell Aurora

Posted by Mark Leuck on April 30, 2008, 12:55 am
If you were  Registered and logged in, you could reply and use other advanced thread options

wrote:
> what make and model is the pir?
>
> --
> **Crash Gordon**
>
>
>
>
>
> > The Vista 20P door sensors work great but the IR motion does not. If
> > its set to N/C then the system does
> > not come ready however its set to N/O then it does which of course is
> > wrong. The programmng summary
> > looks like this:
>
> > ZN ZT P RC HW : RT
> > 05 04 1 10 NC 1
>
> > The motion detect was working on the old Ademco 4030 panel and the LED
> > lights with movement. Ive read
> > through the manual cover to cover as well as the programming guide
> > many times and motion detectors are
> > not even mentioned.
>
> > Any suggestions would be greatly appreciated- Hide quoted text -
>
> - Show quoted text -

> Its a FOX , not sure of the model.

Eww false alarm city


Posted by Red on April 30, 2008, 7:37 am
If you were  Registered and logged in, you could reply and use other advanced thread options
wrote:

>> Its a FOX , not sure of the model.
>
>Eww false alarm city

Jesus Christ! Spend five bucks and get a real motion detector!

Similar ThreadsPosted
Wired Ademco motion detector problem January 29, 2008, 12:41 am
Need Help with odd Ademco Vista 20P problem April 15, 2007, 1:08 pm
Troubleshooting a Ademco Vista 20P Sensor problem? September 28, 2008, 8:18 pm
ds924 Motion Det. Set-Up Help Please? September 30, 2005, 8:55 am
Swann DVR-4 motion and RS-232 ? August 10, 2006, 6:02 am
PIR Motion Detectors September 18, 2006, 2:59 pm
Old Motion Detector December 21, 2006, 9:04 pm
Power 632 and Motion March 30, 2007, 9:38 am
Antique Motion October 21, 2007, 12:32 pm
Looking for Ext Wireless Motion with a speaker... July 8, 2005, 8:53 am

The site map in XML format XML site map

Contact Us | Privacy Policy