|
Posted by Frank Olson on May 9, 2008, 2:10 am
If you were Registered and logged in, you could reply and use other advanced thread options Doug wrote:
>>>> I hope he's not expecting actual "help" from an idiot that thinks
>>>> there's a 24 volt version of the Vista 128.
>>> Or the idiot who thinks the Allegro has an integrated dialer
>> He's wrong about the Vista-128. It is indeed available in a 24 Volt
>> model.
> http://www.security.honeywell.com/hsc/products/control/co/14968.html
>
> http://library.ademconet.com/MWT/fs2/1/1403.pdf
>> Regards,
>> Robert L Bass
>>
>> ==============================>
>> http://www.bassburgIaraIarms.com
>> ==============================>
>
>
>
> Not to worry Frank, it could be worse, at least you didn't keep harping on
> about an idiot who thinks there is a 24 volt version.
I saw that exact same webpage a couple of years ago and thought much
like Bass did. It wasn't until I read the manual and understood that
the *panel* is not 24VDC. Only the module powering the NAC circuits is.
|