Veritas R8 PIR problem

Veritas R8 PIR problem
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Veritas R8 PIR problem diy-newby 02-20-2008
Posted by Frank Olson on February 20, 2008, 11:44 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Doug wrote:
> Hell of a price to pay, just to understand him.


Just for that, we're going to cut back on the power we're sending you. :-)

Posted by Doug on February 20, 2008, 11:55 am
If you were  Registered and logged in, you could reply and use other advanced thread options
You send power to England?

Doug

--

> Doug wrote:
>> Hell of a price to pay, just to understand him.
>
>
> Just for that, we're going to cut back on the power we're sending you.
> :-)



Posted by Frank Olson on February 21, 2008, 12:04 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Doug wrote:
> You send power to England?


We send power to California. We send beans to England.

Posted by diy-newby on February 20, 2008, 11:29 am
If you were  Registered and logged in, you could reply and use other advanced thread options

> Could you explain what this means; "...not activate the part alarm unset
> procedure."?
>
>
>
> --
> **Crash Gordon**
>
When in part set, activating the kitchen PIR starts a countdown procedure
where the code needs inputting in a certain amount of time before the alarm
sounds.



Posted by Crash Gordon on February 20, 2008, 5:28 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
ah an interior delay zone...yuck.

--
**Crash Gordon**






|
| > Could you explain what this means; "...not activate the part alarm unset
| > procedure."?
| >
| >
| >
| > --
| > **Crash Gordon**
| >
| When in part set, activating the kitchen PIR starts a countdown procedure
| where the code needs inputting in a certain amount of time before the
alarm
| sounds.
|
|



Similar ThreadsPosted
Veritas R8 Problem May 5, 2006, 5:59 pm
Veritas R8 - tamper November 17, 2005, 3:46 pm
WANTED - Veritas PCB November 18, 2005, 10:55 am
Veritas 8C manuals October 20, 2006, 11:57 am
Veritas R8 old manual October 23, 2006, 1:54 pm
HELP VERITAS R8 with CQR SIGMA BELL July 6, 2005, 4:55 pm
Re: HELP VERITAS R8 with CQR SIGMA BELL July 6, 2005, 11:14 pm
Veritas 8C - needs a complete reset. November 24, 2005, 2:59 pm
Texecom Veritas 8 install manual October 27, 2005, 9:26 am
SD1+ problem August 25, 2005, 11:24 pm

The site map in XML format XML site map

Contact Us | Privacy Policy