|
Posted by Bill on September 10, 2005, 3:08 am
If you were Registered and logged in, you could reply and use other advanced thread options
Hello again group,
I was wondering if all zones fire, smoke, heat, motion and doors should be
programmed as supervised and should they all be 24hr?
I know fire is 24 hour supervised, but do the motion detectors and door
sensors need to be 24 hour as well?
Thanks
Bill
simard@nycap.rr.com
http://www.USENETHOST.com 100% Uncensored , 100% Anonymous, 5$/month Only!
|
|
Posted by Jackcsg on September 10, 2005, 6:28 am
If you were Registered and logged in, you could reply and use other advanced thread options
It depends on the control panel. Typically you wouldn't make an arm/disarm
zone a 24 hour zone, but if the control panel is capable of being programmed
in a fashion where for example:
open-disarmed-nothing
open-armed-alarm
short-disarmed-trouble
short-armed-alarm
and of course normal
Using the resistor for supervision, and receiving a short on the loop
would/could cause a trouble or supervisory signal to be sent to the CS. It
depends on the panel.
Jack
> Hello again group,
>
> I was wondering if all zones fire, smoke, heat, motion and doors should be
> programmed as supervised and should they all be 24hr?
> I know fire is 24 hour supervised, but do the motion detectors and door
> sensors need to be 24 hour as well?
>
> Thanks
>
> Bill
> simard@nycap.rr.com
>
>
>
>
> http://www.USENETHOST.com 100% Uncensored , 100% Anonymous, 5$/month
Only!
|
|
Posted by Crash Gordon on September 10, 2005, 7:17 am
If you were Registered and logged in, you could reply and use other advanced thread options
Kinda sounds like your confusing terms between wireless supervision and a
24hr zone - or something.
Give us more info.
> Hello again group,
>
> I was wondering if all zones fire, smoke, heat, motion and doors should be
> programmed as supervised and should they all be 24hr?
> I know fire is 24 hour supervised, but do the motion detectors and door
> sensors need to be 24 hour as well?
>
> Thanks
>
> Bill
> simard@nycap.rr.com
>
>
>
>
> http://www.USENETHOST.com 100% Uncensored , 100% Anonymous, 5$/month
> Only!
>
|
|
Posted by JoeRaisin on September 10, 2005, 6:33 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Crash Gordon wrote:
> It would help if we knew which panel you're tawking about.
> Kinda sounds like your confusing terms between wireless supervision and a
> 24hr zone - or something.
> Give us more info.
>
>
>
>
>>Hello again group,
>>
>>I was wondering if all zones fire, smoke, heat, motion and doors should be
>>programmed as supervised and should they all be 24hr?
>>I know fire is 24 hour supervised, but do the motion detectors and door
>>sensors need to be 24 hour as well?
>>
>>Thanks
>>
>>Bill
>>simard@nycap.rr.com
>>
>>
>>
>>
>>http://www.USENETHOST.com 100% Uncensored , 100% Anonymous, 5$/month
>>Only!
>>
>
>
>
|
|
Posted by Crash Gordon on September 10, 2005, 4:06 pm
If you were Registered and logged in, you could reply and use other advanced thread options
yet until he gets back from vacation. So far he says it's not been a
problem...he's gonna ask his bro-in-law how he is doing it. ... in other
words I haven't had to deal with it yet:-) When he gets home he's gonna
finish his lan and punch me down so I can Compass it and try out what you
guys had recommended..if I can remember what that was!
Personally I think he needs a 4219 before anything else!
> Hey Crash, what did you end up doing with them interior doors?
>
> Crash Gordon wrote:
>
>> It would help if we knew which panel you're tawking about.
>> Kinda sounds like your confusing terms between wireless supervision and a
>> 24hr zone - or something.
>> Give us more info.
>>
>>
>>
>>
>>>Hello again group,
>>>
>>>I was wondering if all zones fire, smoke, heat, motion and doors should
>>>be programmed as supervised and should they all be 24hr?
>>>I know fire is 24 hour supervised, but do the motion detectors and door
>>>sensors need to be 24 hour as well?
>>>
>>>Thanks
>>>
>>>Bill
>>>simard@nycap.rr.com
>>>
>>>
>>>
>>>
>>>http://www.USENETHOST.com 100% Uncensored , 100% Anonymous, 5$/month
>>>Only!
>>>
>>
>>
|
| Similar Threads | Posted | | Regency 4720 zone questions, N.O. N.C. Supervised 24HR | September 5, 2005, 9:10 pm |
| Per Hour Charge | September 21, 2006, 7:56 pm |
| Free monitoring? up to an hour. | September 25, 2006, 11:06 am |
| 24 Hour Monitoring Companies - Residential | July 26, 2005, 6:47 am |
| Eight and a Half Hour Monitoring Service - Dirt Cheap | July 28, 2005, 7:47 pm |
| Unused Zones | August 8, 2005, 1:45 pm |
| Adding Zones | August 10, 2007, 1:14 pm |
| DCS 832 & LCD5501Z zones | November 29, 2007, 4:10 pm |
| Missing Zones/Caddx NX-8e | February 18, 2006, 11:42 pm |
| Adding Zones to Concord 4 | April 9, 2007, 4:50 pm |
|
XML site map