Scantronic 9800 rr code

Scantronic 9800 rr code
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Scantronic 9800 rr code novarallyman 09-02-2006
Posted by on September 2, 2006, 7:01 am
If you were  Registered and logged in, you could reply and use other advanced thread options
I have a scantronic 9800 which I disconnected as it became wet. Once it
dried out, I have reconnected it, but now have the rr code. I beleive I
need the engineers code to reset this, however I do not have the code
and the company which used to service the alarm is no longer around. Is
there an over ride code or is there some way that I can reset it
without the code ?

Thanks
Colin


Posted by Micky Savage on September 2, 2006, 7:37 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi Colin,
I will try and find it for you, but to be honest I would get rid and replace
it.


Mick
Modern Security Systems.

Leeds U.K.



Posted by Paul Ekins on September 3, 2006, 2:14 am
If you were  Registered and logged in, you could reply and use other advanced thread options
If you don't have the engineer code you may need to contact a local company
to reset the panel for you. It can be defaulted and reprogrammed.
You can find a local company at http://uk.msnusers.com/UKSecurityPanels


--
Paul Ekins

Linc Secure
Ph: 0845 123 2599
www.lincsecure.co.uk


>I have a scantronic 9800 which I disconnected as it became wet. Once it
> dried out, I have reconnected it, but now have the rr code. I beleive I
> need the engineers code to reset this, however I do not have the code
> and the company which used to service the alarm is no longer around. Is
> there an over ride code or is there some way that I can reset it
> without the code ?
>
> Thanks
> Colin
>



Posted by Tel on September 9, 2006, 1:30 pm
If you were  Registered and logged in, you could reply and use other advanced thread options

novarallyman@zoom.co.uk wrote:
> I have a scantronic 9800 which I disconnected as it became wet. Once it
> dried out, I have reconnected it, but now have the rr code. I beleive I
> need the engineers code to reset this, however I do not have the code
> and the company which used to service the alarm is no longer around. Is
> there an over ride code or is there some way that I can reset it
> without the code ?
>
> Thanks
> Colin


Posted by Tel on September 9, 2006, 1:32 pm
If you were  Registered and logged in, you could reply and use other advanced thread options

Tel wrote:
> novarallyman@zoom.co.uk wrote:
> > I have a scantronic 9800 which I disconnected as it became wet. Once it
> > dried out, I have reconnected it, but now have the rr code. I beleive I
> > need the engineers code to reset this, however I do not have the code
> > and the company which used to service the alarm is no longer around. Is
> > there an over ride code or is there some way that I can reset it
> > without the code ?
> >
> > Thanks
> > Colin

I too have a similar problem with my 9800 box. I cannot reset the
keypad using my user access code. Is there a code that I can use to
reset the system?

Tel


Similar ThreadsPosted
Scantronic 9800 bF every 5 minutes July 15, 2006, 4:07 pm
Scantronic 9800 Installation Manual July 5, 2006, 9:06 am
Scantronic 9800 BF Error message March 21, 2007, 8:06 am
Need to change access code for Scantronic Spartan sp750 December 28, 2006, 1:05 pm
Silent Knight 9800 Reciever July 11, 2005, 11:48 am
Scantronic 9100 fault March 30, 2008, 3:24 pm
Scantronic 500r+ reset tamper April 11, 2007, 8:59 am
Changing the chime on a Scantronic SP750 March 22, 2008, 10:02 am
Scantronic 9751 internal sounder/fire detector September 8, 2006, 5:46 am
Code October 25, 2006, 11:29 pm

The site map in XML format XML site map

Contact Us | Privacy Policy