Rolling codes

Rolling codes
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Rolling codes RD 05-06-2006
Posted by RD on May 6, 2006, 8:26 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
The battery in my remote failed, and I took it out to purchase a new one. A
few days later, I installed the new battery, and the LED in the remote
lights, but without any response from the car's alarm system. The other
remote works fine, so it is not the car alarm. Any ideas? The alarm is a
Viper 550 ESP, and the remote says on the back 2^66 rolling codes. Are the
rolling codes out of sync with the car? How do I resync it?

Randy



Posted by G. Morgan on May 6, 2006, 9:37 pm
If you were  Registered and logged in, you could reply and use other advanced thread options

>The battery in my remote failed, and I took it out to purchase a new one. A
>few days later, I installed the new battery, and the LED in the remote
>lights, but without any response from the car's alarm system. The other
>remote works fine, so it is not the car alarm. Any ideas? The alarm is a
>Viper 550 ESP, and the remote says on the back 2^66 rolling codes. Are the
>rolling codes out of sync with the car? How do I resync it?


Press the "lock" icon key several times within range of the vehicle to
re-sync it.

Page 17
http://www.directeddealers.com/manuals/og/viper/439V.pdf

Is Google broken again?





--

-Graham

remove the double 'e' to email me.

Posted by Randall Duke on May 8, 2006, 9:43 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Thanks for the reply, but it didn't work. The LED in the remote lights, but
the car does not respond.

Any other ideas?

Randy



>
>>The battery in my remote failed, and I took it out to purchase a new one.
>>A
>>few days later, I installed the new battery, and the LED in the remote
>>lights, but without any response from the car's alarm system. The other
>>remote works fine, so it is not the car alarm. Any ideas? The alarm is a
>>Viper 550 ESP, and the remote says on the back 2^66 rolling codes. Are
>>the
>>rolling codes out of sync with the car? How do I resync it?
>
>
> Press the "lock" icon key several times within range of the vehicle to
> re-sync it.
>
> Page 17
> http://www.directeddealers.com/manuals/og/viper/439V.pdf
>
> Is Google broken again?
>
>
>
>
>
> --
>
> -Graham
>
> remove the double 'e' to email me.



Posted by G. Morgan on May 8, 2006, 9:58 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
wrote:

>Any other ideas?


Nope, sorry.

--

-Graham

remove the double 'e' to email me.

Similar ThreadsPosted
Reporting codes August 21, 2005, 3:32 am
User codes October 21, 2006, 11:01 am
ADT Focus 32 - No Codes need help!! February 28, 2008, 12:33 pm
Contact ID codes April 3, 2008, 7:29 pm
Ge Concord Express 60-806 Missing Codes March 18, 2007, 4:10 pm
Re: NFPA's Creation of Security Standards/Codes June 13, 2005, 9:58 am
Error check list for GEM-P9600 codes April 1, 2007, 6:10 pm
Uk Shoppers - Discount Vouchers and Promotional Codes - NOREPLY May 30, 2005, 4:59 pm
*Complete* list of Vista 10SE programming codes? September 15, 2005, 5:32 am
Brinks Keypad Model 2000, Master/Auxiliary Codes ? October 24, 2007, 8:14 pm

The site map in XML format XML site map

Contact Us | Privacy Policy