|
Posted by Johnny Lee on March 7, 2007, 11:43 am
If you were Registered and logged in, you could reply and use other advanced thread options
I am doing research on the problems that organziations encounter with
the use of panic buttons (malfunctioning, not used, hitting it
accidently) and the barriers to installing them (cost, installation
issues).
If anyone is aware of any such articles or documentation that I can
review and cite, I would very much apprecitate it. You reply here or
to me directly at jlee@peaceatwork.org.
Thank you very much, Johnny Lee
|
|
Posted by Roland on March 7, 2007, 4:17 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I don't know about writing an article but I can tell you about issues. In
large facilities often no one knows what the button is due to staffing
changes. They don't know how and when to use it, and it doesn't get reset
after use if not supervised properly (and tested frequently). In cube farms
where furniture moving is a sport devices become disconnected, lost or
abandoned.
.
>I am doing research on the problems that organziations encounter with
> the use of panic buttons (malfunctioning, not used, hitting it
> accidently) and the barriers to installing them (cost, installation
> issues).
> If anyone is aware of any such articles or documentation that I can
> review and cite, I would very much apprecitate it. You reply here or
> to me directly at jlee@peaceatwork.org.
> Thank you very much, Johnny Lee
>
|
|
Posted by Jim on March 7, 2007, 9:16 pm
If you were Registered and logged in, you could reply and use other advanced thread options > I don't know about writing an article but I can tell you about issues. In
> large facilities often no one knows what the button is due to staffing
> changes. They don't know how and when to use it, and it doesn't get reset
> after use if not supervised properly (and tested frequently). In cube farms
> where furniture moving is a sport devices become disconnected, lost or
> abandoned.
In (Many) years past, hold up buttons used to be useful ( I should say
not troublesome) People knew what they were for. There was a popular
device called a "foot rail" in an 18" housing mounted on the floor,
that could be activated with the toe of your shoe, by pushing up a
"rail". I don't see them around any more. This was an Ademco item and
they also had a undercounter holdup button with a key lock reset.
There was also a "money clip" for cash drawers. Nowdays, they just
seem to be installed to cause false alarms .... for all the reasons
and more, that you've given. Could have something to do with there
being more family owned businesses back then.
I had a hold up system and CCTV set up in a gas station/convenience
store, lots of years ago. The video tape showed 3 big brothers coming
in at 3 in the morning with trench coats on. The first one pulls a
shotgun from under his coat and wants the guy to open the register.
The counter man is so scared that he can't get the register open. The
dude with the shot gun comes around the counter and trys to encourage
the counter man with some shouting and threats with the weapon. The
counterman reaches for the hold up button but before he can get to it
the guy wacks him a few times in the head with the shotgun barrel and
then points it at him as if to shoot him. He didn't, and finally got
him to open the register. They never even looked at or seemed to care
that the cameras were on them. When it was all over, he called 911
anyway, instead of using the HU button.
>From that point until now, I'll do what ever I can to disuade people
from installing them. Some employee, or anyone in a panic situation
like that and not in his right mind just may make the move that could
kill him. Let them take whatever they want and leave. They can call
911 after they leave.
|
|
Posted by alarman on March 7, 2007, 8:02 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> I am doing research on the problems that organziations encounter with
> the use of panic buttons (malfunctioning, not used, hitting it
> accidently) and the barriers to installing them (cost, installation
> issues).
> If anyone is aware of any such articles or documentation that I can
> review and cite, I would very much apprecitate it. You reply here or
> to me directly at jlee@peaceatwork.org.
> Thank you very much, Johnny Lee
I used to install the kind that latched. That way, the dumbass that pressed
it to see what happened couldn't deny it and blame the false alarm on a
system malfunction. Manager has the reset key.
Trouble is, when the key is needed, they can't find it. "What's it look
like?" or, "You never gave us one" and " Can you come and reset it for us?
What do you mean, service charge"
<sigh>
js
|
| Similar Threads | Posted | | cost of installation- hard wired panic buttons | March 10, 2007, 8:56 am |
| Best Information and Articles about VoIP | February 24, 2008, 11:07 pm |
| Looking for some documentation | December 1, 2006, 10:58 pm |
| Old Honeywell Documentation Wanted | October 18, 2007, 6:21 pm |
| Settings for Napco DST | February 7, 2007, 9:22 am |
| Napco 1632 - Ambush settings | November 26, 2008, 3:36 pm |
| Vista 20p Panic | November 6, 2005, 3:31 pm |
| GE CareGuard Crystal Panic Button | March 13, 2008, 4:01 pm |
| Wireless Panic Button that dials to mobile numbers? | December 13, 2005, 7:07 am |
| CCTV Video issues | January 12, 2007, 10:44 pm |
|
XML site map