|
Posted by Jackcsg on August 19, 2005, 4:58 am
If you were Registered and logged in, you could reply and use other advanced thread options
I love to torment Radio Shack Salesman. They always want to ask you what
you're using it for. It only ever takes about 6 seconds for the "deer in the
headlights" look when I tell them. Generally what I need takes visiting 4 or
5 stores in a 20 mile radius to get all the parts.
It should be "You've got questions....so do we..." clueless.
> Heh heh, I asked a Rat Shack sales rep that question several years ago (I
> had noticed a Radionics keypad mounted on the wall behind the counter)...
He
> just stood there with a big "?" above his head... Then I asked why Tandy
> motion detectors weren't installed in the store, the "?" got bigger... The
> guy went from being an electronics expert to electrically retarded in less
> than 60 seconds :-))
>
> > Wonder why Radio Shack doesn't put their own product in their own
> > stores.....
> > It's clearly better stuff than Radionic's.....
> >
> >> Sorry I forgot to add the link...and what a pain it was to find it
again.
> >> http://support.radioshack.com/support_security/doc17/17355.htm
> >>
> >> And again...not sure if this is for the keypad you have either..
> >>
> >> hth
> >>
> >>
> >> >I don't see the sheet Crash? The only programming it needs (I'm
> > guessing)
> >> > is setting up codes to turn the alarm on and off.
> >> >
> >> > Thanks,
> >> >
> >> > Jim
> >> >
> >> >> here's a sheet for the 49-452 keypad... I can't remember if that was
> > the
> >> >> right one for thqt system or not...been a looonnnng time since I
> >> >> worked
> >> > for
> >> >> Radio Shaft.
> >> >>
> >> >>
> >> >> > My wife's church just replaced the batteries in their Radio Shack
> > Safe
> >> >> > House
> >> >> > 49-450B security system but they don't have the manual to
reprogram
> > it.
> >> >> > The
> >> >> > RS Web site has all the technical details (specifications,
> >> >> > installation,
> >> >> > panel pictures, troubleshooting etc.) but no owner's manual for
the
> >> >> > programming from the keypad.
> >> >> >
> >> >> > There are a couple of these items (or similar) on eBay but don't
> >> >> > want
> >> >> > to
> >> >> > buy
> >> >> > one, just need to know how to program it, it was working fine
before
> >> > their
> >> >> > power failure.
> >> >> >
> >> >> > I've searched the Web and newsgroups but haven't found any
> >> >> > references
> >> > that
> >> >> > would point me to a good source.
> >> >> >
> >> >> > This particular newsgroup appears to support the professional
> > community
> >> >> > more
> >> >> > than the do-it-yourselfer so do apologize for the intrusion.
> >> >> >
> >> >> > Any info is appreciated, thanks.
> >> >> >
> >> >> > Jim
> >> >> >
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>
| 
XML site map