Opinions on the GE Digia-4-160 MPEG-4 DVR

Opinions on the GE Digia-4-160 MPEG-4 DVR
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Opinions on the GE Digia-4-160 MPEG-4 DVR Ned 02-04-2008
Posted by Ned on February 4, 2008, 9:31 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Anyone have expereince with this? It's a GE product and going for
about $799 for 4 channels. It uses MPEG-4 which it states is for small
applications. I plan to purchase 2 IP cameras and use 1 existing
analog camera.

thanks

Posted by Roland Moore on February 4, 2008, 9:55 am
If you were  Registered and logged in, you could reply and use other advanced thread options
I haven't had any luck with GE DVRs.
I have only used about a dozen or so, but they all have been problem units.
Most issues involve some aspect of the PTZ control element.

> Anyone have expereince with this? It's a GE product and going for
> about $799 for 4 channels. It uses MPEG-4 which it states is for small
> applications. I plan to purchase 2 IP cameras and use 1 existing
> analog camera.
>
> thanks



Posted by Bob La Londe on February 4, 2008, 10:38 am
If you were  Registered and logged in, you could reply and use other advanced thread options
> Anyone have expereince with this? It's a GE product and going for
> about $799 for 4 channels. It uses MPEG-4 which it states is for small
> applications. I plan to purchase 2 IP cameras and use 1 existing
> analog camera.
>
> thanks

IP cameras with a generic DVR ???



--
Posted via a free Usenet account from http://www.teranews.com


Posted by Matt Ion on February 4, 2008, 11:46 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Ned wrote:
> Anyone have expereince with this? It's a GE product and going for
> about $799 for 4 channels. It uses MPEG-4 which it states is for small
> applications. I plan to purchase 2 IP cameras and use 1 existing
> analog camera.

I went through two of these one one site. Both failed within a couple
months. GE support was almost impossible to reach and of practically no
help either time.

They don't support IP cameras, either.

Don't walk away... run.

Posted by Ned on February 4, 2008, 1:29 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
> Ned wrote:
> > Anyone have expereince with this? It's a GE product and going for
> > about $799 for 4 channels. It uses MPEG-4 which it states is for small
> > applications. I plan to purchase 2 IP cameras and use 1 existing
> > analog camera.
>
> I went through two of these one one site. =A0Both failed within a couple
> months. =A0GE support was almost impossible to reach and of practically no=

> help either time.
>
> They don't support IP cameras, either.
>
> Don't walk away... run.

Thanks. Any thoughts on an IP camera solution for two cameras? Axis
offers software that can be loaded onto a PC to handle this for a
small site.

Similar ThreadsPosted
Opinions July 6, 2005, 12:00 pm
opinions please December 3, 2005, 7:49 am
Looking for serious opinions. August 7, 2006, 2:44 pm
Wren CCTV - opinions June 20, 2007, 7:27 pm
Chubb or ADT for Residential Installation - Opinions Please September 16, 2008, 2:37 pm

The site map in XML format XML site map

Contact Us | Privacy Policy