Notifier sfp 1024 Ph 2 Trouble

Notifier sfp 1024 Ph 2 Trouble
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Notifier sfp 1024 Ph 2 Trouble Grumpster 09-22-2007
Posted by Grumpster on September 22, 2007, 12:50 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Anyone ever run into this problem?

The system is reporting a Ph 2 trouble and I can't get it to clear.
It is not a problem with the phone line, because I have dial tone at
the panel. The manual does not explain what this trouble is and how
to fix it (at least not that I can find). I have programmed all the
fields for the primary and secondary phone.

Notifier tech support will not help because I am not an authorized
Notifier dealer.

Thanks for your help!


Posted by on September 22, 2007, 1:20 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
> Anyone ever run into this problem?
>
> The system is reporting a Ph 2 trouble and I can't get it to clear.
> It is not a problem with the phone line, because I have dial tone at
> the panel. The manual does not explain what this trouble is and how
> to fix it (at least not that I can find). I have programmed all the
> fields for the primary and secondary phone.
>
> Notifier tech support will not help because I am not an authorized
> Notifier dealer.
>
> Thanks for your help!

Try reversing the TIP and Ring. Not sure if its like mircom's dialers
which are polarity sensitive.


Posted by Robert L Bass on September 22, 2007, 2:55 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
> The system is reporting a Ph 2 trouble and I can't get it to clear.

Add chlorine.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>


Posted by shotgun boogie on September 22, 2007, 3:17 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Grumpster wrote:
> Anyone ever run into this problem?
>
> The system is reporting a Ph 2 trouble and I can't get it to clear.
> It is not a problem with the phone line, because I have dial tone at
> the panel. The manual does not explain what this trouble is and how
> to fix it (at least not that I can find). I have programmed all the
> fields for the primary and secondary phone.
>
> Notifier tech support will not help because I am not an authorized
> Notifier dealer.
>
> Thanks for your help!


Low telco line voltage maybe?

I had a similar problem on a residential burg installation with a Telguard
TG-7 cell backup unit. The cell unit kept reporting telco trouble. I had
dial tone at the panel, and all seemed ok, but when I measured the telco
voltage it was 22.5 vdc. (Digital telco line by Cox Cable) The cable company
found the trouble on their side, but I wasn't there when their tech was, so
I don't know what they found. When I went back after their repair, the telco
line voltage was 48.5 vdc and all has been well since.
js



Posted by Robert L Bass on September 22, 2007, 7:42 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
>
> I had a similar problem on a residential burg installation with a
> Telguard TG-7 cell backup unit. The cell unit kept reporting telco
> trouble. I had dial tone at the panel, and all seemed ok, but when
> I measured the telco voltage it was 22.5 vdc. (Digital telco line
> by Cox Cable) The cable company found the trouble on their side,
> but I wasn't there when their tech was, so I don't know what they
> found. When I went back after their repair, the telco line voltage
> was 48.5 vdc and all has been well since.

We had an interesting problem with one of the earlier Tellular units.
It showed line fault as soon as we powered it up. I checked the
phone line and it was within spec. The panel reported fine and
regular phones had no problem. I called the manufacturer and they
asked if we had grounded the cabinet. We had. They said to break
the ground connection. I did. Problem solved.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
941-925-8650
4883 Fallcrest Circle
Sarasota · Florida · 34233
http://www.bassburglaralarms.com
=============================>


Similar ThreadsPosted
Need a Notifier SFP 1024 manual November 8, 2005, 9:39 pm
Notifier AFB-200 July 23, 2005, 10:40 am
Notifier March 31, 2007, 1:35 am
Notifier AFP400 August 31, 2005, 5:25 pm
Notifier Equipment May 3, 2007, 4:13 pm
Notifier Parts May 9, 2007, 7:46 pm
SDI Trouble Definition September 20, 2005, 1:27 pm
DSC Communications trouble - October 6, 2005, 7:22 pm
Check 70 Trouble April 4, 2007, 9:28 pm
DSC 2550 trouble October 26, 2008, 10:10 am

The site map in XML format XML site map

Contact Us | Privacy Policy