Napco GEM-p1632 Wireless PIR question

Napco GEM-p1632 Wireless PIR question
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Napco GEM-p1632 Wireless PIR question Knight Houston 07-13-2006
Posted by Knight Houston on July 13, 2006, 10:50 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Is the wireless PIR bypassed when in INTERIOR mode ? I have not found
the location to set it as a interior device. Should they show up in my
zone directory ?

Thanks for any help


Posted by Bob La Londe on July 13, 2006, 11:48 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
> Is the wireless PIR bypassed when in INTERIOR mode ? I have not found
> the location to set it as a interior device. Should they show up in my
> zone directory ?
>
> Thanks for any help


You have to set it as an interior zone.




--
Posted via a free Usenet account from http://www.teranews.com


Posted by Knight Houston on July 14, 2006, 10:48 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Do you know where is the location to set it as a interior zone. I have
looked thur the program manual and I do not see this any where. I did
see how to auto enroll which is what I did. I set them up as ZN09 and
ZN10 .... but I do not see where it is located in direct addressing.

I have all my other devices set thur direct address so I am fimilar
with it, just do not have the location for the wireless devices.

thanks for all you help Bob



Bob La Londe wrote:
> > Is the wireless PIR bypassed when in INTERIOR mode ? I have not found
> > the location to set it as a interior device. Should they show up in my
> > zone directory ?
> >
> > Thanks for any help
>
>
> You have to set it as an interior zone.
>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com


Posted by Jim on July 14, 2006, 11:47 am
If you were  Registered and logged in, you could reply and use other advanced thread options

Knight Houston wrote:
> Do you know where is the location to set it as a interior zone. I have
> looked thur the program manual and I do not see this any where. I did
> see how to auto enroll which is what I did. I set them up as ZN09 and
> ZN10 .... but I do not see where it is located in direct addressing.
>
> I have all my other devices set thur direct address so I am fimilar
> with it, just do not have the location for the wireless devices.
>
> thanks for all you help Bob
>

All I can tell you is that it's in the Zone Features area.

I don't/never manually program these panels, so I can't give you a
location number.


Similar ThreadsPosted
Napco Wireless Gem-PIR June 26, 2005, 7:45 pm
Napco Wireless??? August 28, 2005, 4:59 pm
Napco Wireless Reporting October 4, 2007, 12:29 pm
Re: Napco EZM Question... November 24, 2005, 10:30 pm
Napco Spread Spectrum wireless March 31, 2008, 4:53 pm
Re: Napco Spread Spectrum wireless April 1, 2008, 12:21 am
Napco 2600 question February 7, 2007, 3:17 pm
Question about Napco 8-zone expander October 22, 2005, 4:47 pm
Napco P9600 Technical Question January 18, 2006, 10:58 am
Concord Wireless Zone Question July 12, 2006, 7:50 pm

The site map in XML format XML site map

Contact Us | Privacy Policy