NX8E keyswitch

NX8E keyswitch
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
NX8E keyswitch Proguard Security 08-01-2008
Posted by Proguard Security on August 1, 2008, 1:33 am
If you were  Registered and logged in, you could reply and use other advanced thread options
At one of my NX8E installations i added a keyswitch at zone 21 (on expanders
Z13) and i programmed it as momentary keyswitch (11). I connect the NC-C
relay output from the wireless receiver but nothing happens... Nor arm-nor
disarm... :-( Am i missing something??

Thanks in adnavce...
Spyros - Thessaloniki - Greece



Posted by Crash Gordon on August 1, 2008, 2:54 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Does the arming zone function manually ... if you short it out not using the
receiver relay?

--
**Crash Gordon**







> At one of my NX8E installations i added a keyswitch at zone 21 (on
> expanders Z13) and i programmed it as momentary keyswitch (11). I connect
> the NC-C relay output from the wireless receiver but nothing happens...
> Nor arm-nor disarm... :-( Am i missing something??
>
> Thanks in adnavce...
> Spyros - Thessaloniki - Greece
>


Posted by Proguard Security on August 1, 2008, 11:14 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Nothing happens. The zone opens at LCD keypad manually and secure ok but
arm-disarm... no.....


>
> Does the arming zone function manually ... if you short it out not using
> the receiver relay?
>
> --
> **Crash Gordon**
>
>
>
>
>
>
>
>> At one of my NX8E installations i added a keyswitch at zone 21 (on
>> expanders Z13) and i programmed it as momentary keyswitch (11). I connect
>> the NC-C relay output from the wireless receiver but nothing happens...
>> Nor arm-nor disarm... :-( Am i missing something??
>>
>> Thanks in adnavce...
>> Spyros - Thessaloniki - Greece
>>
>



Posted by Bob on August 1, 2008, 11:32 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Proguard Security wrote:
> Nothing happens. The zone opens at LCD keypad manually and secure ok but
> arm-disarm... no.....

is this system partitioned?

Posted by Bob on August 1, 2008, 11:36 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Proguard Security wrote:
> At one of my NX8E installations i added a keyswitch at zone 21 (on expanders
> Z13) and i programmed it as momentary keyswitch (11). I connect the NC-C
> relay output from the wireless receiver but nothing happens... Nor arm-nor
> disarm... :-( Am i missing something??
>
> Thanks in adnavce...
> Spyros - Thessaloniki - Greece
>
>
r u using resistor?

Similar ThreadsPosted
XP400 Keyswitch? March 24, 2007, 6:46 am
Caddxc NX8E modem September 19, 2005, 8:36 pm
Configuring CO loop on NX8E January 19, 2007, 6:09 pm
NX8E master user fault April 22, 2006, 12:31 pm
Numerexsolutions;GE-NX8E; GSM Digital Cellular November 29, 2007, 11:43 pm
Caddx NX8E Alarm in Memory clear October 19, 2006, 12:59 am
Newbie help - Caddx NX8e fire alarm reset August 4, 2005, 7:23 pm

The site map in XML format XML site map

Contact Us | Privacy Policy