|
Posted by on October 29, 2005, 4:48 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I bought a house with a ADT Safewatch 3000. I'd like to remove the
keypad to paint the wall, but can't see how it's attached.
Suggestions?
Thanks!
|
|
Posted by Crash Gordon on October 29, 2005, 5:00 pm
If you were Registered and logged in, you could reply and use other advanced thread options
Two slots either on the top or bottom (i forget) put screwdriver in slot and
gently push to unlock the snaps, it will sorta hinge off in the opposite
direction of the slots...if slot on bottom it will hinge off towards the
top...some keypads also have tiny snaps on each side as well.
Then you'll see the mounting screws...just let it hang from the wires while
you paint.
|I bought a house with a ADT Safewatch 3000. I'd like to remove the
| keypad to paint the wall, but can't see how it's attached.
| Suggestions?
|
| Thanks!
|
|
|
Posted by on October 29, 2005, 7:01 pm
If you were Registered and logged in, you could reply and use other advanced thread options
my wall; I was thinking it might have been glued, and just a little bit
more force might free it from the wall. :-)
|
|
Posted by Crash Gordon on October 29, 2005, 7:27 pm
If you were Registered and logged in, you could reply and use other advanced thread options
I have seen some idiots glue the keypads to the wall with construction
adhesive....not pretty when its time to paint!
| Crash, thank you. I found the slots on the bottom. You probably saved
| my wall; I was thinking it might have been glued, and just a little bit
| more force might free it from the wall. :-)
|
|
|
|
Posted by Frank Olson on October 30, 2005, 4:11 am
If you were Registered and logged in, you could reply and use other advanced thread options
> yer welcome.
>
> I have seen some idiots glue the keypads to the wall with construction
> adhesive....not pretty when its time to paint!
Besides, it also means you also have to make darn sure the keyad's level
*before* the glue sets up... ;-))
|
| Similar Threads | Posted | | Keypad | August 26, 2005, 11:39 am |
| Need help adding a keypad | August 1, 2005, 10:26 am |
| Alarm Keypad | August 19, 2005, 11:26 pm |
| FBI XL4600RM keypad | November 24, 2005, 7:14 pm |
| nx-12 keypad query | June 4, 2006, 6:24 am |
| swapping out a keypad? | February 11, 2007, 9:12 am |
| WTB: DSC LCD600 Keypad | April 13, 2007, 2:25 pm |
| Keypad height | June 6, 2007, 10:37 pm |
| WTB - Radionics D-626 Keypad | June 29, 2007, 9:55 am |
| ADT Galaxy keypad | March 15, 2008, 8:49 am |
|
XML site map