Electromagnetic lock wiring

Electromagnetic lock wiring
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Electromagnetic lock wiring sam 02-10-2006
Posted by on February 10, 2006, 8:51 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
I need some assistance.

i installed a HID entryprox standalone unit using a padde
electormagnetic lock. Ive wired the hid according to the wiring
diagram. however the maglock does not function. The hid manual suggests
that the mag lock needs a negative connection from the keypad and a
main relay connection.

In the Padde maglock there is a +, - terminal and a NC, common and No
terminal.

I tried connecting to the + and - terminal but the maglock just buzzes,
red light and no magnetism. i tried one to the - and the other
connection to the NC as the HID diagram recommends, but no power.

Can any one give me an idea as to what im doing wrong, or maybe someone
has the padde maglock wiring diagram

thanks in advance
sam


Posted by ABLE_1 on February 10, 2006, 11:11 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
First off you do not indicate the current draw of the MagLock and the
available Power Supply Amps. This must be considered first. After that
wiring config needs to be looked at. So what are the values above???


<>I need some assistance.
>
> i installed a HID entryprox standalone unit using a padde
> electormagnetic lock. Ive wired the hid according to the wiring
> diagram. however the maglock does not function. The hid manual suggests
> that the mag lock needs a negative connection from the keypad and a
> main relay connection.
>
> In the Padde maglock there is a +, - terminal and a NC, common and No
> terminal.
>
> I tried connecting to the + and - terminal but the maglock just buzzes,
> red light and no magnetism. i tried one to the - and the other
> connection to the NC as the HID diagram recommends, but no power.
>
> Can any one give me an idea as to what im doing wrong, or maybe someone
> has the padde maglock wiring diagram
>
> thanks in advance
> sam
>



Posted by Stanley Barthfarkle on February 11, 2006, 2:06 am
If you were  Registered and logged in, you could reply and use other advanced thread options
If you're trying to power the maglock from the HID power supply, it won't
work. The maglock needs its own power supply.


>I need some assistance.
>
> i installed a HID entryprox standalone unit using a padde
> electormagnetic lock. Ive wired the hid according to the wiring
> diagram. however the maglock does not function. The hid manual suggests
> that the mag lock needs a negative connection from the keypad and a
> main relay connection.
>
> In the Padde maglock there is a +, - terminal and a NC, common and No
> terminal.
>
> I tried connecting to the + and - terminal but the maglock just buzzes,
> red light and no magnetism. i tried one to the - and the other
> connection to the NC as the HID diagram recommends, but no power.
>
> Can any one give me an idea as to what im doing wrong, or maybe someone
> has the padde maglock wiring diagram
>
> thanks in advance
> sam
>



Posted by on February 12, 2006, 8:59 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Thnaks, i will power the maglock seperately and give it a go.


Posted by Bill on February 12, 2006, 11:18 am
If you were  Registered and logged in, you could reply and use other advanced thread options
The NC, common and No terminals probably go to a "tamper switch" which
activates when the cover is removed...


>I need some assistance.
>
> i installed a HID entryprox standalone unit using a padde
> electormagnetic lock. Ive wired the hid according to the wiring
> diagram. however the maglock does not function. The hid manual suggests
> that the mag lock needs a negative connection from the keypad and a
> main relay connection.
>
> In the Padde maglock there is a +, - terminal and a NC, common and No
> terminal.
>
> I tried connecting to the + and - terminal but the maglock just buzzes,
> red light and no magnetism. i tried one to the - and the other
> connection to the NC as the HID diagram recommends, but no power.
>
> Can any one give me an idea as to what im doing wrong, or maybe someone
> has the padde maglock wiring diagram
>
> thanks in advance
> sam
>



Similar ThreadsPosted
Vista-15p lock out October 20, 2005, 4:25 pm
Lock on panel January 29, 2008, 2:04 am
Electric Lock choice July 29, 2005, 6:53 pm
Wireless Door Lock Sensor October 24, 2005, 8:49 pm
Safe Room Door Lock February 8, 2006, 10:47 am
lock with motion detector and alarm December 25, 2006, 9:07 pm
LocksmithDownloads.com - lock service manuals October 19, 2007, 12:17 pm
James Bond Credit Card Lock Picks December 30, 2005, 4:09 pm
Cat 5 wiring? July 18, 2005, 8:31 pm
Wiring February 11, 2006, 1:25 pm

The site map in XML format XML site map

Contact Us | Privacy Policy