Changing the chime on a Scantronic SP750

Changing the chime on a Scantronic SP750
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Changing the chime on a Scantronic SP750 BubbaZephyr 03-22-2008
Posted by BubbaZephyr on March 22, 2008, 10:02 am
If you were  Registered and logged in, you could reply and use other advanced thread options
I have a Scantronic SP750 that beeps loudly on both the opening and
closing of every door - which with kids can get really annoying fast.
Is there a way to change it so it only beeps on the opening of a door
or window or somehow otherwise adjust the volume?

TIA!

Posted by Jim Rojas on March 22, 2008, 10:20 am
If you were  Registered and logged in, you could reply and use other advanced thread options
BubbaZephyr wrote:
> I have a Scantronic SP750 that beeps loudly on both the opening and
> closing of every door - which with kids can get really annoying fast.
> Is there a way to change it so it only beeps on the opening of a door
> or window or somehow otherwise adjust the volume?
>
> TIA!

I just skimmed through the installation manual. There is no adjustment
on chime tone that I can see. The best you can do is press * + 6 to turn
it on and off.

Jim Rojas

Posted by Crash Gordon on March 22, 2008, 12:15 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
or put tape over the sounder; technically we call this 'stuffing a sock in
it'





--
**Crash Gordon**






| BubbaZephyr wrote:
| > I have a Scantronic SP750 that beeps loudly on both the opening and
| > closing of every door - which with kids can get really annoying fast.
| > Is there a way to change it so it only beeps on the opening of a door
| > or window or somehow otherwise adjust the volume?
| >
| > TIA!
|
| I just skimmed through the installation manual. There is no adjustment
| on chime tone that I can see. The best you can do is press * + 6 to turn
| it on and off.
|
| Jim Rojas



Posted by JoeRaisin on March 22, 2008, 12:34 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Crash Gordon wrote:
> or put tape over the sounder; technically we call this 'stuffing a sock in
> it'
>
>
>
>
>

Yeah - like the workers at a big chain store my company services. They
have a large graphics board at the customer service desk that alerts the
clerks when an unauthorized door is opened or a fire or supervisory zone
is tripped with a light and a piezo.

Of course they find too hard to ignore with that damned sounder going
off and every once in a while some brilliant person will crumple up a
bunch of paper or a cloth and stuff it against the sounder behind the
graphics board.

I have found a couple of browned and crispy from the heat (even the
cloth ones).

Posted by BubbaZephyr on March 23, 2008, 10:30 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Thanks guys. Shockingly I have the manual as well and noticed nothing
about the chime in it. The *+6 thing didn't work btw. And I think the
only way to tape it up is to remove the panel and find the sounder. I
think it's behind the keypad.

Bummer.

Ah well, I'm sure I'll get used to it eventually.
Cheers!


On Sat, 22 Mar 2008 09:15:15 -0700, "Crash Gordon"

>or put tape over the sounder; technically we call this 'stuffing a sock in
>it'

Similar ThreadsPosted
Need to change access code for Scantronic Spartan sp750 December 28, 2006, 1:05 pm
Ademco Vista-10SE Chime does not chime July 2, 2007, 12:36 am
Changing the call list January 2, 2007, 7:24 pm
Scantronic 9800 bF every 5 minutes July 15, 2006, 4:07 pm
Scantronic 9800 rr code September 2, 2006, 7:01 am
Scantronic 9100 fault March 30, 2008, 3:24 pm
bought a new house - changing security code, etc February 2, 2006, 5:09 pm
Scantronic 9800 Installation Manual July 5, 2006, 9:06 am
Scantronic 9800 BF Error message March 21, 2007, 8:06 am
Scantronic 500r+ reset tamper April 11, 2007, 8:59 am

The site map in XML format XML site map

Contact Us | Privacy Policy