Change Phone Number Dialed??

Change Phone Number Dialed??
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Change Phone Number Dialed?? George-NY 03-03-2006
Posted by George-NY on March 3, 2006, 8:19 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Hi All:
Can the phone number on a ADEMCO home alarm (VIA39+, VISTA10, 4111XM) be
changed from the one it now dials? Ant help is appreciated.
George -NY



Posted by Frank Olson on March 4, 2006, 1:04 am
If you were  Registered and logged in, you could reply and use other advanced thread options
George-NY wrote:
> Hi All:
> Can the phone number on a ADEMCO home alarm (VIA39+, VISTA10, 4111XM) be
> changed from the one it now dials? Ant help is appreciated.
> George -NY
>
>


Yes. You'll need access to installer level programming. This can be
done from the keypad (unless of course the installing company "locked
out" keypad and local programming). If that's the case, you're SOL.
You can always disconnect the board and send it to a number of different
individuals that post here who will unlock it and default it for a fee.
Jim Rojas in Florida, Bob Campbell in Ontario, and "AJ" in Vancouver.
Or you can replace it with a new upgraded one (just make sure your
keypads are compatible).

Frank Olson
http://www.yoursecuritysource.com

Posted by Crash Gordon on March 4, 2006, 10:29 am
If you were  Registered and logged in, you could reply and use other advanced thread options
The VIA39+ will be hard to unlock eh?


| George-NY wrote:
| > Hi All:
| > Can the phone number on a ADEMCO home alarm (VIA39+, VISTA10, 4111XM)
be
| > changed from the one it now dials? Ant help is appreciated.
| > George -NY
| >
| >
|
|
| Yes. You'll need access to installer level programming. This can be
| done from the keypad (unless of course the installing company "locked
| out" keypad and local programming). If that's the case, you're SOL.
| You can always disconnect the board and send it to a number of different
| individuals that post here who will unlock it and default it for a fee.
| Jim Rojas in Florida, Bob Campbell in Ontario, and "AJ" in Vancouver.
| Or you can replace it with a new upgraded one (just make sure your
| keypads are compatible).
|
| Frank Olson
| http://www.yoursecuritysource.com
|



Posted by George-NY on March 4, 2006, 11:21 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Thank you Frank and Crash for the reply. I guess it is a little above me to
change the phone number. I guess it is going to be easier to change alarm
systems. I was with an alarm company for 3 years and not satisfied with the
service. Almost a half hour response time. They are now out of business.
Wanted to change the number from them to a neighbor who could look out the
window and write down a plate number at least.
Thanks again guys for taking your time to reply to my question.
George-NY
> The VIA39+ will be hard to unlock eh?
>
>
message
> | George-NY wrote:
> | > Hi All:
> | > Can the phone number on a ADEMCO home alarm (VIA39+, VISTA10, 4111XM)
> be
> | > changed from the one it now dials? Ant help is appreciated.
> | > George -NY
> | >
> | >
> |
> |
> | Yes. You'll need access to installer level programming. This can be
> | done from the keypad (unless of course the installing company "locked
> | out" keypad and local programming). If that's the case, you're SOL.
> | You can always disconnect the board and send it to a number of different
> | individuals that post here who will unlock it and default it for a fee.
> | Jim Rojas in Florida, Bob Campbell in Ontario, and "AJ" in Vancouver.
> | Or you can replace it with a new upgraded one (just make sure your
> | keypads are compatible).
> |
> | Frank Olson
> | http://www.yoursecuritysource.com
> |
>
>



Posted by Mr.Double-sided tape on March 4, 2006, 11:34 am
If you were  Registered and logged in, you could reply and use other advanced thread options
What if the neighbor isn't home? What happens if there's a fire or
medical emergency
Do you feel comfortable placing your family's safety in the hands of
your neighbor because it will save a few bucks?
Did you test your system weekly?
What signal was sent that took 1/2 an hour for a response, and did you
disarm the system immediately after it tripped?
Call a few local alarm companies and have them look at your system, and
possibly switch you to a more reliable monitoring station.
If you want help locating some NY companies then email me and I'll be
glad to help.

Best of luck,

Tom


George-NY wrote:
> Thank you Frank and Crash for the reply. I guess it is a little above me to
> change the phone number. I guess it is going to be easier to change alarm
> systems. I was with an alarm company for 3 years and not satisfied with the
> service. Almost a half hour response time. They are now out of business.
> Wanted to change the number from them to a neighbor who could look out the
> window and write down a plate number at least.
> Thanks again guys for taking your time to reply to my question.
> George-NY
> > The VIA39+ will be hard to unlock eh?
> >
> >
> message
> > | George-NY wrote:
> > | > Hi All:
> > | > Can the phone number on a ADEMCO home alarm (VIA39+, VISTA10, 4111XM)
> > be
> > | > changed from the one it now dials? Ant help is appreciated.
> > | > George -NY
> > | >
> > | >
> > |
> > |
> > | Yes. You'll need access to installer level programming. This can be
> > | done from the keypad (unless of course the installing company "locked
> > | out" keypad and local programming). If that's the case, you're SOL.
> > | You can always disconnect the board and send it to a number of different
> > | individuals that post here who will unlock it and default it for a fee.
> > | Jim Rojas in Florida, Bob Campbell in Ontario, and "AJ" in Vancouver.
> > | Or you can replace it with a new upgraded one (just make sure your
> > | keypads are compatible).
> > |
> > | Frank Olson
> > | http://www.yoursecuritysource.com
> > |
> >
> >


Similar ThreadsPosted
need phone number for alliance group February 3, 2006, 11:10 pm
Entering a new phone number on an ADT system March 31, 2008, 1:15 pm
reprogram alarm co phone number via-30pse vista-10se September 15, 2006, 1:48 am
ademco 20SE and 4286 phone module ring number? November 20, 2006, 11:26 pm
Issue: GE Simon Sirens Stop when # is Dialed July 31, 2005, 2:18 am
Tel. number converter March 16, 2006, 4:14 pm
Looking for UN number a gel cell battery December 10, 2005, 11:42 pm
Recommedations for 800 number providers February 18, 2007, 2:52 pm
Napco GEM-RP1CAe2 compatibility number February 1, 2006, 12:59 am
USP cell voice dialer Number January 1, 2007, 11:51 am

The site map in XML format XML site map

Contact Us | Privacy Policy