12 vdc

12 vdc

Secure Home | Search | About
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
12 vdc Rich 03-19-2008
---> Re: 12 vdc Bob La Londe03-19-2008
|--> Re: 12 vdc Frank Olson03-19-2008
---> Re: 12 vdc Just Looking03-20-2008
| `--> Re: 12 vdc Bob La Londe03-21-2008
Posted by alarman on March 21, 2008, 12:32 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Roland Moore wrote:
>> Now *this* would be a little closer:
> 2425 (PHYS 2426) Electricity and Magnetism.
> Note:
>> Credit in both Physics 1420 and Phys 2425 cannot be given.
> It is virtually the same class. One is for Physics majors.
>
>> But *here* is the course that would have taught any usable circuit
>> design:
> I wasn't after a EE degree.
> So that takes us back to the beginning when I said to call the physics
> department at a local university. I am glad you now agree.
>
>> Just Looking wrote:
>>
>>>> Last time I took physics they didn't teach DC circuit analysis.
>>>
>>> Really? Were you awake the whole time? I think you missed a big
>>> part of the class.
>>
>> Nope, I did very well in physics, I found it fascinating.
>>
>>> Here is the class I took where I learned DC circuit analysis (AC
>>> too for that matter). The professor was so old school he taught
>>> using the old way of electron flow from positive to negative,
>>> instead of negative to positive (he knew the difference, it was
>>> just easier to teach it the way he learned it) 1420 (PHYS 1402)
>>> General Physics II. (3-2) This is the second course in a two
>>> semester sequence which is a survey of the basic laws and
>>> principles of physics and includes the topics of waves, electricity
>>> and magnetism, and light. PHYS 1410 and 1420 are designed for those
>>> students whose program requires technical physics but who are not
>>> pre-engineering students or majors or minors in physics.
>>> Prerequisites: PHYS 1410; MATH 1315 with a grade of "C" or higher.
>>> MATH 1317 is recommended.
>>
>> You didn't learn DC or AC circuit analysis in the course you quoted
>> below because it is a PHYSICS course. Sure you may have gotten the
>> theory of electron flow there -- but not in-depth circuit analysis...
>>
>> 1420 (PHYS 1402) General Physics II. (3-2) This is the second course
>> in a two semester sequence which is a survey of the basic laws and
>> principles of physics and includes the topics of waves, electricity
>> and magnetism, and light. PHYS 1410 and 1420 are designed for those
>> students whose program requires technical physics but who are not
>> pre-engineering students or majors or minors in physics.
>> Prerequisites: PHYS 1410; MATH 1315 with a grade of "C" or higher.
>> MATH 1317 is recommended.
>>
>> Now *this* would be a little closer:
>>
>> 2425 (PHYS 2426) Electricity and Magnetism. (3-3) A study of the
>> field of electricity and magnetism for physics majors and minors.
>> PHYS 1430, 2425 and 2435 are designed for students majoring in
>> physics and for pre-engineering students. Credit in both Physics
>> 1420 and Phys 2425 cannot be given. Prerequisites: Phys 1430.
>> Corequisites: Math 2472.
>>
>> But *here* is the course that would have taught any usable circuit
>> design:
>>
>> 3416 Applied Electronics. (3-4) Laboratory/lecture course introducing
>> electronic test bench methods for the construction, operation and
>> analysis of important DC/AC circuits utilizing resistors,
>> capacitors, diodes, BJT's, FET's, OpAmps, and analog/digital ICs.
>> The behavior of the circuits will be modeled in SPice, Elementary
>> semiconductor device physics and microfabrication methods will be
>> discussed. Prerequisite: PHYS 2435.
>>
>> http://www.txstate.edu/physics/underpc.html
>>
>> --
>>
>> -G

OK, so which one of you Einsteins will draw the schematic? Ready, go.

--
js

He who laughs last.......thinks the slowest



Posted by Roland Moore on March 21, 2008, 10:15 am
If you were  Registered and logged in, you could reply and use other advanced thread options
OK, so which one of you Einsteins will draw the schematic? Ready, go.

You know he isn't giving enough information to design a circuit.
What is the input voltage and source? Why mention the AH rating of the
battery? Does this need to work for a specific amount of time?
But if he wants to play then he can go here:
http://www.walter-fendt.de/ph14e/wheatstone_e.htm

> Roland Moore wrote:
> >> Now *this* would be a little closer:
> > 2425 (PHYS 2426) Electricity and Magnetism.
> > Note:
> >> Credit in both Physics 1420 and Phys 2425 cannot be given.
> > It is virtually the same class. One is for Physics majors.
> >
> >> But *here* is the course that would have taught any usable circuit
> >> design:
> > I wasn't after a EE degree.
> > So that takes us back to the beginning when I said to call the physics
> > department at a local university. I am glad you now agree.
> >
> >> Just Looking wrote:
> >>
> >>>> Last time I took physics they didn't teach DC circuit analysis.
> >>>
> >>> Really? Were you awake the whole time? I think you missed a big
> >>> part of the class.
> >>
> >> Nope, I did very well in physics, I found it fascinating.
> >>
> >>> Here is the class I took where I learned DC circuit analysis (AC
> >>> too for that matter). The professor was so old school he taught
> >>> using the old way of electron flow from positive to negative,
> >>> instead of negative to positive (he knew the difference, it was
> >>> just easier to teach it the way he learned it) 1420 (PHYS 1402)
> >>> General Physics II. (3-2) This is the second course in a two
> >>> semester sequence which is a survey of the basic laws and
> >>> principles of physics and includes the topics of waves, electricity
> >>> and magnetism, and light. PHYS 1410 and 1420 are designed for those
> >>> students whose program requires technical physics but who are not
> >>> pre-engineering students or majors or minors in physics.
> >>> Prerequisites: PHYS 1410; MATH 1315 with a grade of "C" or higher.
> >>> MATH 1317 is recommended.
> >>
> >> You didn't learn DC or AC circuit analysis in the course you quoted
> >> below because it is a PHYSICS course. Sure you may have gotten the
> >> theory of electron flow there -- but not in-depth circuit analysis...
> >>
> >> 1420 (PHYS 1402) General Physics II. (3-2) This is the second course
> >> in a two semester sequence which is a survey of the basic laws and
> >> principles of physics and includes the topics of waves, electricity
> >> and magnetism, and light. PHYS 1410 and 1420 are designed for those
> >> students whose program requires technical physics but who are not
> >> pre-engineering students or majors or minors in physics.
> >> Prerequisites: PHYS 1410; MATH 1315 with a grade of "C" or higher.
> >> MATH 1317 is recommended.
> >>
> >> Now *this* would be a little closer:
> >>
> >> 2425 (PHYS 2426) Electricity and Magnetism. (3-3) A study of the
> >> field of electricity and magnetism for physics majors and minors.
> >> PHYS 1430, 2425 and 2435 are designed for students majoring in
> >> physics and for pre-engineering students. Credit in both Physics
> >> 1420 and Phys 2425 cannot be given. Prerequisites: Phys 1430.
> >> Corequisites: Math 2472.
> >>
> >> But *here* is the course that would have taught any usable circuit
> >> design:
> >>
> >> 3416 Applied Electronics. (3-4) Laboratory/lecture course introducing
> >> electronic test bench methods for the construction, operation and
> >> analysis of important DC/AC circuits utilizing resistors,
> >> capacitors, diodes, BJT's, FET's, OpAmps, and analog/digital ICs.
> >> The behavior of the circuits will be modeled in SPice, Elementary
> >> semiconductor device physics and microfabrication methods will be
> >> discussed. Prerequisite: PHYS 2435.
> >>
> >> http://www.txstate.edu/physics/underpc.html
> >>
> >> --
> >>
> >> -G
>
> OK, so which one of you Einsteins will draw the schematic? Ready, go.
>
> --
> js
>
> He who laughs last.......thinks the slowest
>
>



Posted by alarman on March 21, 2008, 7:35 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Roland Moore wrote:
> You know he isn't giving enough information to design a circuit.
> What is the input voltage and source? Why mention the AH rating of the
> battery? Does this need to work for a specific amount of time?


Nice dodge.
Graham?

--
js

He who laughs last.......thinks the slowest



Posted by G. Morgan on March 21, 2008, 8:04 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
alarman wrote:

>Roland Moore wrote:
>> You know he isn't giving enough information to design a circuit.
>> What is the input voltage and source? Why mention the AH rating of the
>> battery? Does this need to work for a specific amount of time?
>
>
>Nice dodge.
>Graham?

What?

--

-G

Posted by alarman on March 21, 2008, 8:13 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
G. Morgan wrote:
> What?

Huh?

--
js

He who laughs last.......thinks the slowest




The site map in XML format XML site map

Contact Us | Privacy Policy