12 vdc

12 vdc

Secure Home | Search | About
Login Password
Register Now! Lost Password?
 CCTV, Alarms and other Physical Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
12 vdc Rich 03-19-2008
---> Re: 12 vdc Bob La Londe03-19-2008
|--> Re: 12 vdc Frank Olson03-19-2008
---> Re: 12 vdc Just Looking03-20-2008
| `--> Re: 12 vdc Bob La Londe03-21-2008
Posted by Rich on March 19, 2008, 7:15 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Who's a good tech?



I need a circuit drawn Using a 12 V DC 8 AH batteries, zener's and
components to get 9 Volts DC for a 1 amp load.

And 7.6 Volts DC for a 2 amp load.



Would some one draw one?



Richard E. Lenker





Posted by Bob La Londe on March 19, 2008, 11:05 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Zeners? Why not just use resistors?

How precise must the voltages be?


> Who's a good tech?
>
>
>
> I need a circuit drawn Using a 12 V DC 8 AH batteries, zener's and
> components to get 9 Volts DC for a 1 amp load.
>
> And 7.6 Volts DC for a 2 amp load.
>
>
>
> Would some one draw one?
>
>
>
> Richard E. Lenker
>
>
>
>



Posted by Rich on March 19, 2008, 11:13 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Not that special
Give it a try



> Zeners? Why not just use resistors?
>
> How precise must the voltages be?
>
>
>> Who's a good tech?
>>
>>
>>
>> I need a circuit drawn Using a 12 V DC 8 AH batteries, zener's and
>> components to get 9 Volts DC for a 1 amp load.
>>
>> And 7.6 Volts DC for a 2 amp load.
>>
>>
>>
>> Would some one draw one?
>>
>>
>>
>> Richard E. Lenker
>>
>>
>>
>>
>
>



Posted by Frank Olson on March 19, 2008, 11:26 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Rich wrote:
> Who's a good tech?
>
>
>
> I need a circuit drawn Using a 12 V DC 8 AH batteries, zener's and
> components to get 9 Volts DC for a 1 amp load.
>
> And 7.6 Volts DC for a 2 amp load.
>
>
>
> Would some one draw one?
>
>
>
> Richard E. Lenker
>
>
>
>


Why not just buy an off the shelf adjustable power supply. Altronix
used to make one but I haven't seen in on my local distributor's shelf
for a while. You might want to check their website at
http://www.altronix.com.

Posted by Jim Rojas on March 19, 2008, 11:44 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Just series in 1 watt zeners until you get a voltage you can live with.
4 or 5 zeners should produce roughly 9 volts. Just use a meter as you
connect each one.

Jim Rojas




Rich wrote:
> Who's a good tech?
>
>
>
> I need a circuit drawn Using a 12 V DC 8 AH batteries, zener's and
> components to get 9 Volts DC for a 1 amp load.
>
> And 7.6 Volts DC for a 2 amp load.
>
>
>
> Would some one draw one?
>
>
>
> Richard E. Lenker
>
>
>
>


The site map in XML format XML site map

Contact Us | Privacy Policy