|
Posted by Rick Merrill on December 28, 2006, 9:04 pm
If you were Registered and logged in, you could reply and use other advanced thread options
> rick0.merrill@NOSPAM.gmail.com says...
>> Leythos wrote:
>>> rick0.merrill@NOSPAM.gmail.com says...
>>>> I'm looking for a Hardware Firewall that can
>>>> be given a whitelist of IP addresses to permit
>>>> to use FTP.
>>>>
>>>> In looking at some possibilities I have not been able to see
>>>> this specific capability!
>>> Most firewall appliances do this, in fact, those that don't offer this
>>> ability are not really firewalls, they are most likely NAT routers
>>> claiming to be firewalls.
>>>
>>> The cheapest solution I know if, hardware, is the DFL-700 series
>>> firewall from D-Link, the best solutions I know of come from WatchGuard,
>>> but neither company makes a "cheap" solution, they start around $300 and
>>> up.
>>>
>> Thanks!!!! I've contacted WatchGuard and they're sending a quote and a
>> URL for a manual!
>
> What one did they suggest for your requirement? I've got about 60+
> currnetly in the field and just spec'd 3 more for a pharmacy group.
>
Well, their man recommended the "X10E" (12 x ports 10/100) - sounds
like overkill for what I need.
| 
XML site map