Drivecrypt won't open dcv file on DVD disk

Drivecrypt won't open dcv file on DVD disk
Secure Home | Search | About
Login Password
Register Now! Lost Password?
 Computer Software Security    Post an article   get this group's latest topics as an RSS feed add this group's latest topics to your My MSN content add this group's latest topics to your My Yahoo content add this group's latest topics to your Google content
Subject Author Date
Drivecrypt won't open dcv file on DVD disk folderann 02-10-2008
Posted by folderann on February 10, 2008, 11:57 am
If you were  Registered and logged in, you could reply and use other advanced thread options
Running DriveCrypt 4.61 on Vista Business 64 .

If the dcv file is on a DVD/CD drive, when I enter the password,
nothing happens. The password screen remains. There is no error
message.

If I copy the file from the DVD to a hard disk, it opens without a
problem. It takes at least 5 minutes to copy the dcv file from DVD/CD
drive to the disk each time I want to access one file.

The only thing I can think of is that these dcv files were created on
drivecrypt on a 32 bit version of Windows XP. Then again, the
container itself is formatted in FAT32.

I'd appreciate any help. Thanks.

Posted by Sebastian G. on February 10, 2008, 12:36 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
folderann wrote:

> Running DriveCrypt 4.61 on Vista Business 64 .
>
> If the dcv file is on a DVD/CD drive, when I enter the password,
> nothing happens. The password screen remains. There is no error
> message.
>
> If I copy the file from the DVD to a hard disk, it opens without a
> problem. It takes at least 5 minutes to copy the dcv file from DVD/CD
> drive to the disk each time I want to access one file.
>
> The only thing I can think of is that these dcv files were created on
> drivecrypt on a 32 bit version of Windows XP. Then again, the
> container itself is formatted in FAT32.
>
> I'd appreciate any help. Thanks.


You're running two obviously defective software products. What else did you
expect?

Posted by folderann on February 10, 2008, 2:05 pm
If you were  Registered and logged in, you could reply and use other advanced thread options
Thanks for taking the time to reply.


wrote:

>folderann wrote:
>
>> Running DriveCrypt 4.61 on Vista Business 64 .
>>
>> If the dcv file is on a DVD/CD drive, when I enter the password,
>> nothing happens. The password screen remains. There is no error
>> message.
>>
>> If I copy the file from the DVD to a hard disk, it opens without a
>> problem. It takes at least 5 minutes to copy the dcv file from DVD/CD
>> drive to the disk each time I want to access one file.
>>
>> The only thing I can think of is that these dcv files were created on
>> drivecrypt on a 32 bit version of Windows XP. Then again, the
>> container itself is formatted in FAT32.
>>
>> I'd appreciate any help. Thanks.
>
>
>You're running two obviously defective software products. What else did you
>expect?

Similar ThreadsPosted
bestcrypt 7.20 vs drivecrypt 4.4 December 18, 2006, 7:37 am
DriveCrypt Plus Boot Problem November 16, 2008, 3:50 pm
Drivecrypt pre-boot auth versus multiple users October 11, 2005, 3:12 pm
Open Relay Servers March 20, 2006, 4:23 am
Open Relay Servers March 20, 2006, 12:20 pm
International Call for Open Standards September 9, 2005, 3:19 pm
Japan & China going Open Source... October 6, 2005, 11:58 pm
Open Source Taking Over Europe October 21, 2005, 10:36 pm
Port forwarding/open ports? January 30, 2006, 2:51 pm
DEF CON 14 is now in effect! The Call for Papers is open. February 22, 2006, 9:16 pm

The site map in XML format XML site map

Contact Us | Privacy Policy